Product Finder

Designed to accurately pinpoint underground utilities & buried services up to 100 feet deep w/ accurate depth measurement to 20 feet

CO2 monitor (N. American power supply)

Designed for OEMs who require high performance, reliability & stability for absolute, gauge & compound measurements

0 to 35 bar, BSPP Male

0 to 5 psi, Gauge, 4 to 20 mA, 1.5" Tri-Clamp, Cable

0 to 150 psi, Gauge Pressure

-2,000 to 2,000 mbar, Differential, Gauge

0 to 250 psi, Gauge Pressure

0 to 50,000 psi, Gauge, 4 to 20 mA, 1/2" High Pressure NPSM, Cable, (-50 to 250 °F)

-1 to 1 psi, Differential Pressure

0 to 10 inH2O, Differential Pressure

-1 to 1 psi, Compound Gauge Pressure

0 to 75 psi

0 to 100 psi, Gauge, 4 to 20 mA

0 to 15 psi, Absolute , Cable

0 to 5,000 psi, Gauge, 4 to 20 mA, 1/2x1/4" NPT MxF, Mini DIN 43650 C, °C (-40 to 220 °F)

0 to 100 psi, Gauge, 4 to 20 mA, Cable

0 to 100 psi, Gauge, 4 to 20 mA, 1/4" NPT Male, MIL-26482-I 10-6P, (-49 to 240 °F)

0 to 100 psi, Gauge, 4 to 20 mA, 1/4" NPT Male, Cable

-160 to 160 inH2O, Differential Pressure

Sanitary tri-clamp with all stainless steel construction designed to eliminate debris build-up in the diaphragm

0 to 300 psi, Gauge

Low Pressure Industrial Transmitter

0 to 300 psi, Gauge, NPT Female

Designed for continuous level measurement in clean water, reservoir and treatment plants

Designed for continuous level measurement in clean water, reservoirs and treatment plants

Direct mount measurement for pressures up to 1,450 psi, & with universal HART communications protocol

Measures differential pressure up to 2,900 psi, for use w/ diaphragm seal, communicates using HART communications protocol.

Plug-on Local Display

0 to 2 inH2O, Unidirectional

0 to 20 psi, Absolute , 4 to 20 mA, Cable

0 to 100 psi, Gauge, 2 mV/V, 1/2" UNF Male, Cable

0 to 7 bar, Gauge, 4 to 20 mA, Cable

-10 to 10 inH2O, 1 to 5 Vdc

High Accuracy oil filled Wet/Dray and Wet/Wet Differential Pressure Transducers

Direct mount transmitter for absolute pressure measurements up to 435 psia, universal HART communications protocol

Measures absolute pressure up to 435 psia, for use w/ diaphragm seal, communicates using HART communications protocol

Microprocessor-based high performing transmitter

Microprocessor-based high performing transmitter

Flush mounted stainless steel diaphragm to eliminate any debris build-up in the pressure cavity

Designed to measure the differential pressures of liquids and gases

MTS Tethered Pressure Sensor, 0.025% accuracy, Range: 15 PSI (775.72 mmHg) Absolute Non-Isolated

0 to 30 psi, ±0.5% Accuracy

Measures absolute pressure up to 1,450 psi, for use w/ diaphragm seal, communicates using HART communications protocol

Measures liquid, gas or steam for pressures up to 1450 psia, universal HART communications protocol

Heavy-duty submersible transmitter for level measurement in sludge and slurry installations

Heavy-duty pressure transmitter with advanced digital electronics and high over-pressure protection