Product Finder

Triac plug-in module slot 2

SSR driver plug-in module slots 2 and 3

Angle adapter for Meriam well type included tube manometers

Plastic line trap, ring type, for Meriam well type manometers

Indicating fluids for the Meriam manometers

N.I.S.T. certificate / scale for Meriam manometers

1/4 in NPT street elbow in steel for the 10AA25 Clean-Out U-Type manometer

Float check valve for Meriam manometers

CPVC cable mounting assembly for use with the pH Rugged Electrode

Four channel swith input module for the QEL Q-Controller

Type K thermocouple with 6 in x 1/8 in dia and a 36 in. long lead wire

Type K thermocouple with 72 in. long lead wire and mini plug

1/4" OD, 1/8-27 NPT, Stainless Steel compression fitting

Stainless steel sintered filter, 30 microns with fittings

Rated for 150 PSIG, The HP125 gets installed into a 3.5 inch diameter PVC threaded pipe flange, 4 bolt install, includes rubber gasket

Rated for 300 PSIG, The HP125 gets installed into a 3.75 inch diameter 304 SS Threaded Pipe Flange, 4 bolt install, includes rubber...

Bearing

Gasket

Six (6) authentic Dickson red pens

Bluetooth Headset for TiX560, TiX520, TiX500, Ti450, Ti400, Ti300, TiS75, TiS65, TiS60, TiS55, TiS50, TiS45, TiS40, TiS20, TiS10

Compression fitting for 1/8 in NPT to 1/4 in metal tubing to connect a filter or muffler to the Dwyer Magnehelic and Capsuhelic gages

Mounting bracket for use with the Dwyer wireless differential pressure probes

Heavy duty hard case with pre-cut foam inserts for the Dwyer UHH2 and additional sensors

Field upgradeable LCD for the Dwyer Magnesense II differential transmitter

Power supply for SmartReader Plus Display module available in North American, European Shuko, United Kingdom, and Australian

Neck strap for the DS701 and DS703 FC diagnostic videoscopes

Replacement sensor with a lowest range of 0-100 ppb for use with the AII PI2 oxygen analyzer

PTFE antenna enclosure, 1 1/2" NPT

Counter weight for 2285 float

End clip for DIN rail

1 meter length DIN rail

Conductive level with control switch, 1 or 2 SPDT relay and 24-240 V AC/DC or 24 V AC/DC output

Double insulated voltage probe for Fluke 190 Series ScopeMeters

2-valve block manifold

9 V power adapter

Magnehelic gage panel mounting flange

Allows Magnehelic to be conveniently installed on horizontal or vertical1-1/4 in to 2 in pipes

Authentic Dickson pens - three (3) red pens and three (3) blue pens for two (2) channel temperature

Authentic Dickson pens - three (3) red pens and three (3) blue pens for temperature and humidity

Six (6) authentic Dickson blue pens for humidity only

5/16" nylon tube union

Basic test kit for use with the M1 Series manometers

3/16" OD, 1/8-27 NPT, Stainless Steel compression fitting

1/4" OD, 1/8-27 NPT, Brass compression fitting

1/8" OD, 1/8-27 NPT, Brass compression fitting

3/16" OD, 1/8-27 NPT, Brass compression fitting

Remote display with mini USB display

Loop powered galvanic barrier for use with intrinsically safe transmitters.