Product Finder

Increases the regenerative braking capability of the FRENIC-Mini series inverters.

Watertight, crushproof and dustproof cases for the ultimate in protection

Print flow rate readings & other data from the Fuji Electric Portaflow-C ultrasonic flow meter

FSC I/O cable for Portaflow-C version 1 & 2, & FSC3 I/O cable for Portaflow-C version 3 and 4

Pair of 16 foot cables with Lemo connectors on one end & BNC male connectors on the other

19 inch rail for 2 to 16 inch pipes, -40 to 390°F, 2MHz, includes mounting straps & silicone grease

Use with 0.05 - 1.53 GPM range, PP, 1/4 to 1/2" pipe

Use with 0.10 - 6.53 GPM range, PVDF, 1/4 to 1/2" pipe

Data Acquisition Modules for iNET-R-33 Ω, 8-pack, 0.05%, 5 ppm/°C drift

LABVIEW DRVRS FOR WIN ONLY

K Type Thermocouple Extension Wire

Analog low pass Butterworth filter daughter board for iNET-423 card, 3300 Hz cut off frequency (package of 2)

DC POWER SUPPLIES

Thermistor Probe Temperature Data Logger with LCD Display

Thermistor Probe Temperature Data Logger with LCD Display

7045 Bezel Mounting Kit

JST Connector Cable for PX165

Vinyl Tubing

OMEGAFLEX™ Polypropylene Tubing

OMEGAFLEX™ Polypropylene Tubing

Replacement velocity/temperature sensor with calibration reference book

Replacement power cord and power supply

110 Vac/24Vdc wall socket power supply with 1.7 m (5.5') cord

Strain gage/sensor wiring box with screw terminals

Wiring box with screw terminals

33 kΩ, 8-pack, 0.05%, 5 ppm/°C drift

3300 Ω, 8-pack, 0.05%, 5 ppm/°C drift

1000 Ω, 8-pack, 0.05%, 5 ppm/°C drift

350 Ω, 8-pack, 0.05%, 5 ppm/°C drift

120 Ω, 8-pack, 0.05%, 5 ppm/°C drift

4 Port Manifold w/Heat Controller Assembly

External pressure manifold with hand-tight quick connector.

For Additel ADT878 dry block calibrator

8pc Replacement Foam Set for 1606 Air Case

12 Cables with Over Molded and Compensated Connectors for Thermocouples

Replacement charger with USB-C connector, for portable 6.1 products

Replacement cable for PTFM 6.1

Sensor Cable Extension 50 ft / 15 m with connectors

Replacement Breakout Box

Lightning/Surge Protection in NEMA13,12 Steel Enclosure

Snubber – Noise Suppresser for Relay

Extra Sensor Mounting Kit with Couplant and SS clamps for pipes up to 32” (80 cm)

8 to 235 inch pipes, -40 to 175°F, 0.5MHz, includes 16ft signal cable, mounting straps & silicone grease

21.26 inch rail for 2 to 48 inch pipes, -40 to 248°F, 1MHz, includes mounting straps & silicone grease

21.26 inch rail for 0.5 to 12 inch pipes, -40 to 212°F, 2MHz, includes mounting straps & silicone grease

12.6 inch rail for 0.5 to 4 inch pipes, -40 to 212°F, 2MHz, includes mounting straps & silicone grease

Liquid pH buffer solutions conveniently packaged in one pint bottles