Product Finder

Reduces wiring costs by providing all common module connections on the backplane

Reduces wiring costs by providing all common module connections on the backplane

Powers the D1000, D2000, D3000, D4000, D5000 series and D1701, D1702, D1711 and D1712 digital I/O modules

Converts thermocouple temperature sensor input signals, linearizes the digital data, scales the data and communicates the values to...

Converts analog DC current signals, linearizes the digital data, scales in milliamps and communicates the values to a host computer...

Converts analog DC voltage signals, linearizes the digital data, scales in millivolts and communicates the values to a host computer...

Converts frequency and pulse sensor input signals,

Converts load cell outputs or other bridge type sensors

Converts thermistor temp. sensor input signals, linearizes the digital data, scales in degrees C/F & communicates the values to a...

Converts RTD temp. sensor input signals, linearizes the digital data, scales in degrees C/F & communicates the values to a host...

Eliminates the need to replace batteries, makes monitoring environmental conditions in a fixed location easy

Red protective boot for for M1 series manometers

Battery clamp/cigarette lighter adapter for the H-10 PRO

RS232 configuration kit for C201, MiniPAQ, IPAQ, IPAQ+, IPAQ-4L, ProfIPAQ, IPAQ-21L/22L

A standalone monitoring system for all sensor devices in the EasyLog wifi range

Handheld programmer and data collector for the EasyLog USB range of data loggers

Stainless steel, IP-67 rated waterproof temperature sensor, 10 kΩ and wide operating range

High temperature probe, 1 in x 3/16 in probe with Owl locking connector, 70°C - 255°C (155°F - 490°F)

Medium temperature, 1 in x 3/16 in probe with Owl locking connector, 10°C - 170°C (50°F - 335°F)

Low temperature, stainless steel, 1 in x 3/16 in probe with Owl locking connector, -60°C - 55°C (-75°F - 130°F)

Stainless steel 3.5 in low temperature penetration probe with handle and own locking connector, 3 m (10 ft)

Split core current relay switch that monitors 1.25 - 50 A with adjustable set point and status LEDs

USB cable, communication from docking station to PC

8 GB micro SD memory card for the MFC5150 and MFC5150X

USB to infrared converter

K Type Thermocouple Probe for use with all Lascar Thermocouple Data Loggers

Measures or simulates the resistance of RTD sensors for the Meriam MFT4000 multifunction calibrator

Pressure sensor modules for use with MFT4000 and MFT 4010 calibrators, available in several types and ranges

Stainless steel, 1 in x 3/16 in probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

Stainless steel, 1 in x 3/16 in temperature probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

Human temperature, stainless steel, 1/3 in x 9/64 in probe, 20°C - 40°C (68°F - 104°F) range

Stainless steel, 1 in x 3/16 in probe, -35°C - 95°C (-30°F - 200°F) range

Designed to interface all DGH RS485 products to radio and leased telephone line modems

Allow communications bus lengths up to 4,000 feet and baud rates up to 115.2 K

RS-232 to RS-485 serial communications converters boxes will convert RS232 signal levels to the correct electrical signals required...

24 bit and 64 bit Modbus Digital I/O Boards

24 bit and 64 bit digital I/O boards

0 - 20 mA, 4 - 20 mA current output modules

Communicates in ASCII with RS-232 or RS-485 serial ports

Economical dual-channel temperature and relative humidity data logger with five (5) year battery life

Five (5) channel indoor air quality logger with a ten (10) year battery life

Converts analog DC voltage input signals, linearizes the digital data, scales in millivolts and communicates the values to a host...

USB data acquisition modules for use in process control systems

Usable to temperatures of -40° F to +190° F, low cost , usable range 30-20,000 psi

Exceptional gauge protection while maintaining accuracy and sensitivity, more compact design, available in 1/4” or 1/2” process...

100 Ω, 4 wire RTD probe with metal strain relief wrapped, available with a 6 in or 12 in sheath

One Set of Replacement O-Rings for the PR140

Protects sensor holes from being obstructed by mud & debris, mounts to any rifle sling 1 in - 1.5 in wide, or MALICE Clip