Product Finder

Stand alone heated pressure reduction system 240VAC (300 barg/4350 psig inlet, max 507psig/35barg outlet) - ATEX only

Filter kit for Coalescer and Membrane Separator - each

Michell standard mounting frame, floor standing with sun canopy and three sides- 316 box section construction with roof and side panels

Packing for Mounting Frame and accessories only (crate for air, sea & road)

Packing for Main Unit w/ Indoor or Outdoor Sampling System (crate for air, sea & road)

Michell standard mounting frame, floor standing w/ sun canopy & 3 sides- 316 box section construction w/ roof & side panels

Packing for Analyzer w/ Sun Canopy, GRP Roof & 3 Sides (crate for air, sea & road)

Packing for mounting frame and accessories only (crate for air, sea & road)

Packing for analyser with sun canopy, GRP roof and 3 sides (crate for air, sea & road)

Packing for main unit with indoor or outdoor sampling system (crate for air, sea & road)

SS sintered guard replacement for protection against fine particulates <80µm

Pack of 10 particulate filter cartridges for protection against fine particulates < 0.1µm for 5/8" sampler kits

Filter carriers protect the humidity and temperature sensors and probes against mechanical damage

Pack of 10 replacement HMWPE guards (for protection against fine particulates <10µm)

Connects HF3 transmitter to PC via the UART interface

SS 3/4" UNF sample block (with 1/8" BSP and 1/4" BSP ports)

"5/8"" UNF Quick Fit Sample Block with DN7.2 Quick Connector for compressed air. Outlet vent to atmosphere"

3/4" SS sample block with 1/8" NPT inlet & outlet ports

G 1/2"" Quick Fit Sample Block with DN7.2 Quick Connector for compressed air

G1/2" SS sample block with 1/8" NPT inlet & outlet ports

Particulate filter elements 60µ - each

Sensor/Gas block replacement O-ring kit

S8000 Integrale MK3 rack mounting kit

Dew-point sensor cable 2M

Dew-point sensor cable 10M

Dew-point sensor cable 5M

High Temperature Cable (Pressure Sensor) – 5m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 3m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 20m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 10m (Max 120°C)

19" rack mounting kit (requires a shelf)

Transport case (MK2)

Transit clamp (kit)

Cable (Pressure Sensor) – 10m

Cable (Pressure Sensor) – 5m

Cable (Pressure Sensor) – 3m

Cable (Pressure Sensor) – 0.3m

Cable (Pressure Sensor) – 20m

Pressure Sensor – 0 to 2500 kPa(G) [0 to 25 bar(A)]

Pressure Sensor – 0 to 160 kPa(A) [0 to 1.6 bar(A)]

Mirror viewing microscope (S8000 Integrale & S8000 RS)

Remote PRT for all S8000 models, 2m cable with connector

Transport case (MK2/3)

Converts the RS-232 serial output to USB (includes device plus software- PC compatible)

QMA601 Sample block/oven assembly (calibrated with ~50ppmv MG, 2 barg input, 1 barg back pressure)

QMA601 Sample block/oven assembly (calibrated w/ ~0.5ppmv MG, 2 barg input, 1 barg back pressure)

Contamination trap assembly for the Michell QMA601

Packing for heat trace line up to 15m length (crate for air, sea & road)