Product Finder

Load Cup,Upper 3.75 dia. with 2.480 dia. x .687 long boss. Used in kits 154347, 154348 and 154349

Load Cup, Flintec RC3-50t Lower alloy steel cup to retrofit Mettler Toledo model 760 load cell. Used in kits 129844 and 111367

Load Cup, Flintec RC3-50t Upper alloy steel cups to retrofit Mettler Toledo model 760 load cell. Used in kits 129844 and 111367

Pin, Spring 10mm x 60mm SST For Use With Flintec RC1-250kn anti-rotation

Pelican Protector long case

Replacement O-ring for 1700 protector long case

Protector Case roof mount

Pelican Protector Long Case

Replacement O-ring for 1690 Protector transport case

Heat Trace Essentials: Tape, Clamps, and Caution Labels

Analog low pass Butterworth filter daughter board for iNET-423 card, 10 kHz cut off frequency (package of 2)

Analog low pass Butterworth filter daughter board for iNET-423 card, 380 Hz cut off frequency (package of 2)

Cable, Hd44m to Hd44f, 26 Awg, 3 m (10')

Card cage for iNET-410/420/423/430/460 cards, 4 slots, expandable

Auxillary switches for AU-KU disconnects, 1N.O./1N.C.

Auxillary switches for AU-VKA disconnects, 2N.O./2N.C.

Wand probe, cable 152 mm (6") with DB9 connector (barometric pressure/temperature/humidity)

Industrial probe 137 mm (5"), cable 3m (10') w/ stripped wire leads

Cable assembly, 4 conductor, PVC insulation, wiring code 0

Cable assembly, 4 conductor, FEP insulation, wiring code 6

Cable assembly, 4 conductor, PVC insulation, wiring code 4

Cable assembly, 4 conductor, PVC insulation, wiring code 2A

Cable assembly, 4 conductor, PVC insulation, wiring code 3

CO2 Calibration Kit

CO, LEL, O2 Calibration Kit

CO, NO2, H2S Calibration Kit

Transducer Mounting Kit w/pair of stainless mounting brackets, pair of pipe clamps for OD up to 30" alignment bar & SuperLube...

Adapter,Conduit SST 1/4-18 NPT 3/8-24UNF-ZA

31-Days -50 to 50 F/C Range

USB Configurator for TX206 Transmitters

7- Days 0 to 1000 Range

7-Days. 0 to 250 or 0 to 0.25 F/C

7 Days, 0 to 200 range

LIT,Manual RD-300/RD232 Remote DSPL Operating

Compact inverter with choice of single- or three-phase models and a range of horsepower options

With male terminal for alarm output (cable separate).

Converts transistor outputs on the FRENIC-Mega inverter to relay outputs, four 1C contacts (SPDT)

Enables analog input and output to/from a FRENIC-Mega inverter

Makes it possible to specify frequency commands with binary code or binary coded decimal (BCD)

Pulse Generator interface and synchronization cards for FRENIC-Mega inverters

Allows users to connect a FRENIC-Mega inverter to a CANopen master unit

Connects the FRENIC-Mega inverter to a Fuji MICREX series of programmable logic controllers (T-Link module)

Connects to PROFIBUS DP master node to read and write all FRENIC-Mega function codes

Banana Plug Patch Cord (Black)

Mounting Bracket

RF Kit,LaserLight2 ConnexLink Transceiver Kit

CONN,M12 4 Pin Male Field Wireable 6-8mm OD Right Angle

CONN,M12 4 Pin Male Field Wireable 4-6mm OD Right Angle