Product Finder

14 W coil for 14 Vdc/50 TO 60Hz

14 W coil for 24 Vdc

12 W coil for 12 Vdc

144″ 4-Wire RTD Probe with Stainless Steel Sheath capable of measuring -200 °C to +260 °C.

Replacement hanging fixture and reservoir for LCS140 data logging system.

9-Pin Deutsch Connector for use with the Titan S8-CAN

Magnetic holder for use with the UltraShock and Shock300 data loggers

Replacement battery for HiTemp140 Series

36″ or 72″ Type T thermocouple with SMP connector and PFA insulation

36″ or 72″ Type J thermocouple with SMP connector and PFA insulation

36″ or 72″ Type E Thermocouple with SMP Connector

72″ Type K Thermocouple with Stainless Steel Sheath.

72 in. Type K Thermocouple with Stainless Steel Sheath.

36 in. Type K Thermocouple with Stainless Steel Sheath.

36″, 72″, 3m, 5m, 300″, 50′ or 100′ Type K Thermocouple with SMP Connector

Replaceable Ammonia Sensor

Power supply with interchangeable plugs

Temperature Probe Installation Pack

Wall bracket for EL-IOT devices

Temperature & Humidity Smart Probe for EL-GFX-D2

Spare/Replacement single Transducer

Replacement SS Pipe Clamp

Extra set of 4 Alkaline D-Cell Batteries

Lightning/Surge Protection in NEMA4 Steel Enclosure

Coupling Tape – lower maintenance for permanent installations (price per foot)

PC4S Doppler Sensor Mounting Kit with Expansion Springs

2 year data plan extension, SignalFire Cloud connectivity, SIM included

Ethernet communications interface card.

Ethernet communications interface card.

Connect to CC-link master to use run command, speed command, and to access inverter's function codes

Adds building automation and control network link to FRENIC-Eco inverters for HVAC applications

Connects to PROFIBUS DP master node to read and write all FRENIC-Eco function codes

Enables other LONWORKS devices in the network to issue commands and monitor the inverter status.

Transfer data from your flow meter to your PC, and vice-versa

Raincover

FRENIC-Multi NEMA Kit

Enclosure that protects inverter to NEMA1 (UL Type 1 listed) standards

Pair of 16 foot signal cables with male BNC connectors on both ends

Cable to be used with CC-M Loader Software

Fuji Electric Pipe Tape Measure

Mounting adapter for PXR3 DIN rail installation

11 Pin Back Wired Socket

AD.PLT.1/4-16 - 1/4 TO 1/16 DIN ADAPTER PLATE

Mounting adapter that reduces heat radiated or spread inside the panel enclosure

Adjustable frequency AC drive with customizable logic for up to 200 steps.

Direct insertion zirconium oxide oxygen detector for hazardous locations

Manifolds can be direct-mounted or supplied separately for Fuji differential, gauge & absolute pressure transmitters.

Allows users to remotely operate FRENIC-Mini series of inverters