Product Finder

Shielded Box, Size C (4.25" X 2.64" X 1.71") Unfinished, With Cover

Shielded Box, Size C (4.25" X 2.64" X 1.71") With 2 BNC (F) Blue Enamel, With Cover

Shielded Box, Size C (4.25" X 2.64" X 1.71") Blue Enamel, With Cover

Shielded Box, Size B (2.25" X 1.38" X 1.13") Unfinished, With Cover

Shielded Box, Size B (2.25" X 1.38" X 1.13") Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") With 2 BNC (F) & BNC (M) Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88"), Unfinished, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") With 2 SMA (F) Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") SMA (M &Amp; F) Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") BNC (M), BNC (F) & Binding Posts Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") With 3 BNC (F) Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") BNC (M & F) Blue Enamel, With Cover

Shielded Box, Size A (2.25" X 1.13" X .88") With 2 BNC (F) Blue Enamel, With Cover

Screw, 4-40 UNC-2A, 100 Pcs

Quartz freeze point cell container for the 9114 / 9115A / 9116A freeze-point furnaces

Spare alumina block with 5 wells for the 9117 annealing furnace

IEEE-488 interface (RS-232 to IEEE-488 converter box) for the 9011 calibrator and 9117 annealing furnace

IEEE-488 interface for the 9114 metrology furnace, and 2100 / 2200 benchtop temperature controller.

PressCal is a menu-driven software program for pressure calculation and certificate generation using a deadweight tester as the...

Quickly remove and consistently refit the pointer of a pressure gauge

Allows for calibration of two instruments at the same time

Angle adapter for calibration of gauges with the pressure connection on the rear to position the gauge at 90º

Thread adapters to make connections with the Fluke P5500 series hydraulic and pneumatic comparison test pumps, media separators, and...

Dirt / moisture trap for deadweight testers

Pressure range 0 to 3,000 PSI (210 bar)

Connect directly to a hydraulic deadweight tester or comparison test pump to separate fluids and protect the calibrator from...

Conversion weight sets for applications requiring nominal pressure increments in measurement units different than the main unit

High pressure pneumatic pump / comparator, 21 mpa (3000 psi), NPT

High pressure pneumatic calibration manifold, 21 MPA (3000 PSI)

21 MPa (3000 PSI) high pressure premium NPT or metric fittings

Lines and fittings kit for the Fluke Calibration 2271A industrial pressure calibrator

Pressure measurement modules for the Fluke Calibration 2271A industrial pressure calibrator to extend your pressure range or improve...

Shipping case for three (3) pressure modules for the Fluke Calibration 2271 industrial pressure calibrator

Hard plastic case with foam insert for storage and transportation of the Fluke Calibration 2271A industrial pressure calibrator

MCX Jack, Straight Crimp, 75 Ohm, RG179/U Type

MCX Plug, Straight Crimp, 75 Ohm, RG179/U Type

BNC (M)/F (M), 75 Ohms

BNC (F)/F (M), 75 Ohms

BNC (F)/F (F), 75 Ohms

BNC (M)/F (F), 75 Ohms

BNC (F/M/F) Adapter, In-Line, 75 Ohms

BNC (M) Crimp RG59, 59A, 59B, 62, 210 75 Ohms

BNC (F) Pcb Mount, Right Angle, 75 Ohms

BNC (F) Pcb Mount, Vertical, 75 Ohms

BNC (F/F) Panel Mount, Hermetically Sealed, 75 Ohms

BNC (M/M) Adapter, 75 Ohms

BNC (F/M/F) Adapter, 75 Ohms