Product Finder

Convert up to four analog DC voltage input signals, linearizes the digital data & communicates the values to a host computer or PLC

Module converts frequency and pulse signals, scales the data & communicates the values to a host computer or PLC

Module converts analog DC voltages for load cell or bridge type sensors

Modules provide an isolated 15-bit measurement ADC & discrete digital I/O bits for controlling solid state relays or sensing contact...

Module converts analog DC voltage input signals, linearizes and scales data and communicates values to a host computer or PLC

Provide sensing and control of digital signals by a host using the Modbus RTU protocol via RS485

Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

Converts load cells outputs or bridge type sensor signals, linearizes the digital data, scales the data & communicates the values to...

Converts thermistor temperature sensor input signals, linearizes the digital data, scales the data and communicates the values to a...

Converts RTD temperature sensor input signals, linearizes the digital data, scales the data and communicates the values to a host...

Module converts thermocouple temp. sensor input signals, linearizes the digital data, scales in degrees C/F & communicates the...

Reduces wiring costs by providing all common module connections on the backplane

Reduces wiring costs by providing all common module connections on the backplane

Powers the D1000, D2000, D3000, D4000, D5000 series and D1701, D1702, D1711 and D1712 digital I/O modules

Converts thermocouple temperature sensor input signals, linearizes the digital data, scales the data and communicates the values to...

Converts analog DC current signals, linearizes the digital data, scales in milliamps and communicates the values to a host computer...

Converts analog DC voltage signals, linearizes the digital data, scales in millivolts and communicates the values to a host computer...

Converts frequency and pulse sensor input signals,

Converts load cell outputs or other bridge type sensors

Converts thermistor temp. sensor input signals, linearizes the digital data, scales in degrees C/F & communicates the values to a...

Converts RTD temp. sensor input signals, linearizes the digital data, scales in degrees C/F & communicates the values to a host...

Eliminates the need to replace batteries, makes monitoring environmental conditions in a fixed location easy

Red protective boot for for M1 series manometers

Battery clamp/cigarette lighter adapter for the H-10 PRO

RS232 configuration kit for C201, MiniPAQ, IPAQ, IPAQ+, IPAQ-4L, ProfIPAQ, IPAQ-21L/22L

A standalone monitoring system for all sensor devices in the EasyLog wifi range

Handheld programmer and data collector for the EasyLog USB range of data loggers

Stainless steel, IP-67 rated waterproof temperature sensor, 10 kΩ and wide operating range

High temperature probe, 1 in x 3/16 in probe with Owl locking connector, 70°C - 255°C (155°F - 490°F)

Medium temperature, 1 in x 3/16 in probe with Owl locking connector, 10°C - 170°C (50°F - 335°F)

Low temperature, stainless steel, 1 in x 3/16 in probe with Owl locking connector, -60°C - 55°C (-75°F - 130°F)

Stainless steel 3.5 in low temperature penetration probe with handle and own locking connector, 3 m (10 ft)

Split core current relay switch that monitors 1.25 - 50 A with adjustable set point and status LEDs

USB cable, communication from docking station to PC

8 GB micro SD memory card for the MFC5150 and MFC5150X

USB to infrared converter

K Type Thermocouple Probe for use with all Lascar Thermocouple Data Loggers

Measures or simulates the resistance of RTD sensors for the Meriam MFT4000 multifunction calibrator

Pressure sensor modules for use with MFT4000 and MFT 4010 calibrators, available in several types and ranges

Stainless steel, 1 in x 3/16 in probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

Stainless steel, 1 in x 3/16 in temperature probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

Human temperature, stainless steel, 1/3 in x 9/64 in probe, 20°C - 40°C (68°F - 104°F) range

Stainless steel, 1 in x 3/16 in probe, -35°C - 95°C (-30°F - 200°F) range

Designed to interface all DGH RS485 products to radio and leased telephone line modems

Allow communications bus lengths up to 4,000 feet and baud rates up to 115.2 K

RS-232 to RS-485 serial communications converters boxes will convert RS232 signal levels to the correct electrical signals required...

24 bit and 64 bit Modbus Digital I/O Boards