Product Finder

IQ/OQ/PQ secure software validation workbook and software package

6 packs of 100mm chart paper for Fuji's PHC/E strip chart recorder

Universal recorder ink head for the Fuji Electric PHA, PHC and PHE strip-chart recorders

Replacement lamp for PHC illuminator

Wall mount for the Therm-A-lert, Therm-A-lert-RH or Therm-A-lert-P data loggers

Magnetic mounting kit for the Shock101-EB, UltraShock-EB, and TSR101-EB

Versatile mount or stand for use with the HiTemp140 series of data loggers

One set of replacement O-rings for Level1000

One set of replacement O-rings for the HiTemp140

36 in high-temperature dry heat flexible probe with M12 connector for use with the HiTemp140-M12 data logger

4 in straight static pressure tip with flange

Relay output plug-in module slots 2 and 3

Four channel relay output module for the QEL Q-Controller (Max. 31)

Submersible, stainless steel, extreme temperature thermal barrier for HiTemp140 data loggers

150°C 3.6 V lithium battery, 1/2 AA axial leads

3.6 V lithium battery

Coin cell for in-transit data loggers with a -20°C - 70°C operating environment

150°C, 1/2 AA high-temperature battery

Simple mounting clamp that can be attached to tripods or extension poles with a 1/4 - 20 mounting screw

Sensor adapter for 3 yr. oxygen sensor for the Fyrite INSIGHT Plus

Fyrite user software CD for the Fyrite INSIGHT Plus

Oxygen sensor cap (for 2-year sensor, includes gasket) for the Fyrite INSIGHT Plus

IrDA printer with magnet and disposable batteries for the Fyrite INSIGHT Plus

Replacement combustible sensor for the Informant 2

0019-0510 Replacement refrigerant sensor for the Informant2

Probe tip filters for the H25-IR PRO

Tune-up kit for the H-10 PRO

Replacement combustible gas sensor for the Leakator Jr

Hand strap for the MFC5150

Soft carrying case for the MFC5150

Allows sanitary pressure gauges and transmitters to be installed on lines as small as 1/4” without - need for adaptors or reducers,...

Boot for the MGF16BN digital gauge

Test lead kit for the Meriam M4 series

Oxygen Sensor (2 yrs.) for the PCA3, Fyrite INSIGHT Plus, Fyrite InTech, and Monoxor Plus

Enables the detector to be rotated up to ±3° in the X-Y directions in order to provide fine alignment

Adjustable mounting bracket that provides accurate directional selection for optimum area coverage

Enables the user to connect to any available PC or laptop to re-configure settings or perform diagnostics

Pre-loaded with Spectrex software, enables the user to re-configure settings or perform diagnostics on all Spectrex flame and gas...

It brings fire prevention safety to a higher level by giving you the ability to fully test the operational readiness of your entire...

Enables the designer and installer to optimize the detector's location and the actual detection area coverage of each installed...

Protects from tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter

316 SS flat mounting bracket with bolts

316 SS angle mounting bracket with bolts

Available with 1/8 in or 1/16 in NPT needle

Enables the designer and installer to optimize the detector's location and the actual detection area coverage of each installed...

Protects from tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter

Enables the designer and installer to optimize the detector's location and the actual detection area coverage of each installed...

Protects from tough environmental conditions where they may be exposed to oil vapors, sand, dust and other particulate matter