Product Finder

8 GB micro SD memory card for the MFC5150 and MFC5150X

USB to infrared converter

K Type Thermocouple Probe for use with all Lascar Thermocouple Data Loggers

Measures or simulates the resistance of RTD sensors for the Meriam MFT4000 multifunction calibrator

Pressure sensor modules for use with MFT4000 and MFT 4010 calibrators, available in several types and ranges

Stainless steel, 1 in x 3/16 in probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

Stainless steel, 1 in x 3/16 in temperature probe with Owl locking connector, -35°C - 95°C (-30°F - 200°F)

Human temperature, stainless steel, 1/3 in x 9/64 in probe, 20°C - 40°C (68°F - 104°F) range

Stainless steel, 1 in x 3/16 in probe, -35°C - 95°C (-30°F - 200°F) range

Designed to interface all DGH RS485 products to radio and leased telephone line modems

Allow communications bus lengths up to 4,000 feet and baud rates up to 115.2 K

RS-232 to RS-485 serial communications converters boxes will convert RS232 signal levels to the correct electrical signals required...

24 bit and 64 bit Modbus Digital I/O Boards

24 bit and 64 bit digital I/O boards

0 - 20 mA, 4 - 20 mA current output modules

Communicates in ASCII with RS-232 or RS-485 serial ports

Economical dual-channel temperature and relative humidity data logger with five (5) year battery life

Five (5) channel indoor air quality logger with a ten (10) year battery life

Converts analog DC voltage input signals, linearizes the digital data, scales in millivolts and communicates the values to a host...

USB data acquisition modules for use in process control systems

Usable to temperatures of -40° F to +190° F, low cost , usable range 30-20,000 psi

Exceptional gauge protection while maintaining accuracy and sensitivity, more compact design, available in 1/4” or 1/2” process...

100 Ω, 4 wire RTD probe with metal strain relief wrapped, available with a 6 in or 12 in sheath

One Set of Replacement O-Rings for the PR140

Protects sensor holes from being obstructed by mud & debris, mounts to any rifle sling 1 in - 1.5 in wide, or MALICE Clip

USB 2.0 compatible data card reader

Red protective boot for for M2 series manometers

Flexible single-channel data loggers with visual alarm and 10 year battery life

USB communications interface for configuration and monitoring of Burns PC-programable T51 and T55 transmitters

Hard plastic carrying case to hold the meriGauge plus system

Black protective rubber case for EL-Datapad and EL-Enviropad-TC

Pluggable terminal block for use with MadgeTech data loggers

Wall-mounting station built for use with the Cryo-Temp, LyoTemp, TransiTempII, or the TransiTempII-RH

Audible/visual alarm for the multi- and single-zone refrigerant leak detectors

Remote display module for the multi-zone refrigerant leak detectors (HGM-MZ, AGM-MZ)

External humidity and temperature probe for tight or remote locations

Replacement transducers for the PT400 and PT500 flow meters

Magne-Grip holster, clip magnet and strap

Convert serial digital data from a host computer to analog DC current output signals using an internal 12-bit digital to analog...

Convert digital ASCII data signals from a host computer to analog DC voltage output signals using an internal 12-bit digital to...

Thermocouple wire kit with mini T/C connector, simulation cable and thermocouple adapter

Replacement shorting plug for the Meriam M130 thermocouple calibrator

Compass has a clear base plate which makes it easy to read a map and set bearings

110-120 V, 60 Hz adapter for model 535

Lithium coin cell battery for main PCB for the PGM-IR, single- and multi-zone refrigerant monitors

Spare set electronics with mounting chassis

Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication

Convert analog input signals to digital data and transmit via RS-485 using the Modbus RTU protocol for communication