Automotive

Small diameter, all stainless steel gauge

Economical 2” (50mm) gauge with built-in safety features

Versatile high static low differential pressure gauge

1-1/2" and 2" clamp, fillable dry or liquid-filled gauge

3/4" clamp, dry gauge

Use where harmful vibration and pulsation are present

Ideally suited for process, chemical and petroleum industry

Most economical, all-purpose pressure gauge

Used for low pressure corrosive media where diaphragm seal protection is needed

High quality gauge designed to work with a pneumatic transmitter or controller

Ideally suited for process, chemical and petroleum industry

Indicate Positive, Negative or Differential, Accurate within 1%

Robust digital gauge for harsh environments for either indoor or outdoor use, IP67 rating, 0.25% accuracy

Auto-ranging technology uses multiple piezoresistive sensors to read the entire range using only one gauge, measures from absolute...

Designed for determining the state of an inline filter

Measures pressure drop, over-range protection rated to 3000 PSIG or 6000 PSIG

Monitors the pressure of air and compatible gases

Indicate positive, negative or differential pressures and is accurate within 2%, high impact strength and high temperature rated

Versatile multi-function process gage, 0.25% full scale accuracy, standard with a loop-powered 4 - 20 mA transmitter output

Pressure applications from 10 in. W.C. to 10 PSI, dual scales with 3-2-3% full-scale accuracy on a 2.5 in dial

Large 4.5 in scale, PSI scales with 1% full scale accuracy, stainless steel housing and brass wetted parts

Min/Max intrinsically safe battery powered digital pressure gauges, ±0.25% accuracy

Pressure ranges are available to 5000 PSIG at standard accuracy of ± 0.25% FS or higher accuracy of ± 0.1% FS

Compact, high accuracy pressure transmitter for use in general industrial applications, w/ user-adjustable ranges from vacuum to...

High Pressure Dirt/Moisture Trap

Field adjustable from gage face, unit operates on 12-24 VDC

Calibrate and measure all your current and voltage signal instruments in a 4 to 20 milliamp DC loop

Combination pressure/temperatuer gage, available in three different connection options, simplified installation

Designed for measurements of low pressures of gases and liquids, 1% full scale accuracy, available in 2-1/2 in dial

Measures gas pressure with ± 0.5% of full-scale accuracy, designed for easy installation, user selectable units

Calibrate virtually any pressure sensing device, including transducers, transmitters, gauges or pressure switches

A complete turnkey solution for automation of pressure calibration work up to 10,000 PSI

Able to generate pressure & vacuum for adjusting/calibrating pressure gages, transmitters, or switches

Wide variety of ranges, easy-open breather plug on top, 1.5% FS accuracy

Dual PSI and Bar (x100 kPa) scales with ± 1.5% full-scale accuracy, stainless steel housing and wetted parts

Perfect for applications where resistance to corrosion is necessary as the stainless steel case and ring offer protection from harsh...

Economical gage with selectable engineering units and with 1% or 0.5% accuracy for monitoring air and compatible gases or liquids

Visual monitoring and electronic control of very low differential pressure with an easy-to-read gage in durable and rugged housing

Modular sensor design allows user to select pressure measurement range for application flexibility

Simplified installation, comes in three different connection options, moveable dial with coloured markings

The Series DPG has a high ± 0.25% or ± 0.5% full-scale accuracy

1.5% full scale accuracy in a 2.5 in gage, performance and accuracy for pressure & vacuum applications up to 160 in W.C.

Dual English/metric scales with ±1.6% full scale accuracy

Stand-alone calibration standard for differential and gauge pressure sensors found in critical environments

40 VA to 150 VA, Single or Dual Hub, Circuit Breaker, UL Class 2

40 VA to 150 VA, Single or Dual Hub, Circuit Breaker, UL Class 2

Regulated 0.5 A, 1 A Fuse Protection