Automotive

Eight channel analog input module for the QEL Q-Controller (Max. 16)

120 VAC or 24 VAC, 200 VA

24 VDC red strobe, including horn

Compact, versatile device connecting MadgeTech wireless loggers directly to the cloud, eliminating the need for a central PC

Electrical interface kit for Setra MicroCal pressure calibrator

Replacement sensor for the ECA 450 (not calibrated)

High pressure hose for the PCHP-1 hand pump

Cable gland with 1/2 in male NPT fitting helps seal and protect cable connections to the transmitter

Model RP1, Wired Thermo-Hygrometer Probe for the Model 485B.

Intrinsically safe shunt-diode barrier to be used to communicate with & provide isolation for certain Dwyer transmitters approved...

Surface mounting bracket for use with ISDP pressure transmitters

4-pin bayonet mating connector (E3) with 2 ft. cable ( L1, L3, L10 only)

USB to RS-485 interface module with software

For use with special instruments and Mark II Models 26 and 28

Designed for the user to add a flush mounted panel to the chamber opening, each corner has 10mm mounting threads to attach your panel

Has 6 each 1.125" (28.5 mm) diameter access ports through the door for multi probe calibration

Has 2 access ports with a diameter of 1.9" (48 mm) in the right side of the chamber and 1 additional hygrometer sample port with a...

Return well for Meriam manometers

Air velocity calculator slide chart makes spot checking with Dwyer pitot tubes quick and easy

Fast, convenient installation of pitot tubes in sheet metal ducts

Optional NOx filter kit for the Fyrite InTech and Monoxor Plus

B Smart CO sensor for the Fyrite InTech and Monoxor Plus

Wall adapter kit for the Fyrite INSIGHT Plus

B Smart CO sensor for the Fyrite INSIGHT Plus

Differential pressure and temperature kit for the PCA3 and Fyrite INSIGHT Plus

Thermocouple for the PCA3, Fyrite INSIGHT Plus, and ECA 450

Replacement probe filters (3 pk.) for the water trap for the PCA3. Fyrite INSIGHT Plus. Fyrite InTech. Monoxor Plus. and ECA 450

Printer paper (5 rolls) for the PCA3, Fyrite INSIGHT Plus. Fyrite InTech, and Monoxor Plus

20 ft. hose extension for the PCA3 and ECA 450

AC wall Adapter for the PCA3

Yagi directional antemma for PDW wireless productst

Antenna extension cable for PDW wireless products

Modules are easy to install and add functionality to the wireless system

Retransmits wireless signals, broadcasts long distances and around obstacles

Replacement sensor tip for Setra SRH humidity sensors

Optional extra kit for the Rate-Master Flowmeters and Visi-Float Flowmeters

Mounting gland with 1/2 in male NPT

Split mounting flange for use with pitot tubes and probe assemblies

Flange mounting plate with 1/2 in female NPT

Protective magnetic rubber boot for manometers (manometer not included)

Snap on power relay available in 12 V and 24 V

For use with any PIE Calibrator with 4 “AA” batteries , externally charges batteries before installing in calibrator

120 VAC 60 Hz (North America)

Wires with miniature thermocouple plug on one end and bare leads on the other end, for any PIE Calibrator with thermocouple input

Wires with miniature thermocouple plug on one end and bare leads on the other end, for any PIE Calibrator with thermocouple input

Supports the calibrator from any ferrous surface such as an equipment cabinet or rack, for any PIE calibrator

Zippered pouch with snap belt loop and shoulder strap

Zippered pouch with snap belt loop