Automotive

Shaft retainer

4-pin female (M12) mating connector (E4) with 2 or 5 meters cable

Standard replacement sensor for the AII GPR-1000 oxygen analyzer

Eight channel analog output module for the QEL Q-Controller

Eight channel analog input module for the QEL Q-Controller (Max. 16)

120 VAC or 24 VAC, 200 VA

24 VDC red strobe, including horn

Compact, versatile device connecting MadgeTech wireless loggers directly to the cloud, eliminating the need for a central PC

Electrical interface kit for Setra MicroCal pressure calibrator

Replacement sensor for the ECA 450 (not calibrated)

4-pin bayonet mating connector (E3) with 2 ft. cable ( L1, L3, L10 only)

USB to RS-485 interface module with software

Designed for the user to add a flush mounted panel to the chamber opening, each corner has 10mm mounting threads to attach your panel

Has 6 each 1.125" (28.5 mm) diameter access ports through the door for multi probe calibration

Has 2 access ports with a diameter of 1.9" (48 mm) in the right side of the chamber and 1 additional hygrometer sample port with a...

Return well for Meriam manometers

Optional NOx filter kit for the Fyrite InTech and Monoxor Plus

B Smart CO sensor for the Fyrite InTech and Monoxor Plus

Wall adapter kit for the Fyrite INSIGHT Plus

B Smart CO sensor for the Fyrite INSIGHT Plus

Differential pressure and temperature kit for the PCA3 and Fyrite INSIGHT Plus

Thermocouple for the PCA3, Fyrite INSIGHT Plus, and ECA 450

Replacement probe filters (3 pk.) for the water trap for the PCA3. Fyrite INSIGHT Plus. Fyrite InTech. Monoxor Plus. and ECA 450

Printer paper (5 rolls) for the PCA3, Fyrite INSIGHT Plus. Fyrite InTech, and Monoxor Plus

20 ft. hose extension for the PCA3 and ECA 450

AC wall Adapter for the PCA3

Replacement sensor tip for Setra SRH humidity sensors

Snap on power relay available in 12 V and 24 V

For use with any PIE Calibrator with 4 “AA” batteries , externally charges batteries before installing in calibrator

120 VAC 60 Hz (North America)

Wires with miniature thermocouple plug on one end and bare leads on the other end, for any PIE Calibrator with thermocouple input

Wires with miniature thermocouple plug on one end and bare leads on the other end, for any PIE Calibrator with thermocouple input

Supports the calibrator from any ferrous surface such as an equipment cabinet or rack, for any PIE calibrator

Zippered pouch with snap belt loop and shoulder strap

Zippered pouch with snap belt loop

Hands-free carrying case for evolution products

Available in many range and time options

B Smart CO sensor exchange program for the Fyrite InTech and Monoxor Plus

B smart CO sensor exchange program for the Fyrite INSIGHT Plus

Can be riveted or wire connected to the instrument

DCR controller with 1 to 50 ft range and 3" NPT mounting

DCR Controller with 1 to 25 ft range and 2 " NPT mounting

Connects up to 10 Modbus sensors in a daisy-chain network or a single 4-20 mA sensor to Tank Cloud

O - Rings EPR

O rings FKM

End fitting for model 2100 sensor

4 conductor cable assembly with water tight connector

1¼" NPT full port ball valve with material options