Automotive

Four channel swith input module for the QEL Q-Controller

Type K thermocouple with 6 in x 1/8 in dia and a 36 in. long lead wire

Stainless steel sintered filter, 30 microns with fittings

Rated for 150 PSIG, The HP125 gets installed into a 3.5 inch diameter PVC threaded pipe flange, 4 bolt install, includes rubber gasket

Rated for 300 PSIG, The HP125 gets installed into a 3.75 inch diameter 304 SS Threaded Pipe Flange, 4 bolt install, includes rubber...

Bearing

Gasket

Heavy duty hard case with pre-cut foam inserts for the Dwyer UHH2 and additional sensors

Neck strap for the DS701 and DS703 FC diagnostic videoscopes

Replacement sensor with a lowest range of 0-100 ppb for use with the AII PI2 oxygen analyzer

PTFE antenna enclosure, 1 1/2" NPT

End clip for DIN rail

1 meter length DIN rail

Conductive level with control switch, 1 or 2 SPDT relay and 24-240 V AC/DC or 24 V AC/DC output

USB to mini-USB cable for use with the Dwyer UHH2 universal handheld base unit

Provides the system with improved chamber temperature uniformity

Provides a gas flow rate of 10 to 40 Liters per minute; however this option is only available with the 2500ST model

Trace moisture sensor with stainless steel flow through head

Micro-fuel cell for % or ppm range

Micro-fuel cell only for CO2 and Oxidizer background gas

Includes wafer replacement and membrane kit

Wafer replacement only, this is the moisture sensor element (wafer) plus mounting parts

PVDF Natural, rotor kit (rotor and pin)

Blue sensor cap

Sleeved rotor with PVDF Black, PVDF Natural or ETFE(Tefzel) material options

Provides external temperature probe access through the top panel for measurement of the saturation temperature

Sample chamber,flow through, 316 SS with 1/8” NPT inlet & outlet ports

Sensor complete with sample chamber

Sensor cable with connectors

Rotor kit with tungesten shaft

Rotor kit with stainless steel shaft

Key activation for data log pro

4-pin female micro connector (M12) mating connector (E4) field wireable

4-pin female (M12) mating connector (E4) with 5 meters cable

4-pin female (M12) mating connector (E4) with 2 meters cable

3 pin packard connector with cable options

6-pin bayonet mating connector or connector with 2 ft cable

BACnet output module for the QEl Q-Controller

DIN rail mounting box for modules for the QEL Q-Controller

Standard replacement sensor for gas mixtures with CO2 for use with AII GPR-1500 GB/GPR-2500 GB oxygen analyzers

Replacement sensor with a lowest range of 0-500 ppb for the AII PI2 PPB oxygen analyzer

1 " male NPT probe penetration fitting

3/4" male NPT probe penetration fitting

3 conductor cable

0 V - 3 V humidity probe that includes a 4 ft (1.2 m) cable

Vane thermo-anemometer probe with coiled cable

Fitting cap kit (cap and gasket)