Automation Products Group

Low cost, reliable switches designed for shock resistance and chemical compatibility

Built-in hysteresis for better pump control and suited for use in waste water and sewage applications with low specific gravity

Single point level sensors that switch ON or OFF at one level, highly chemical resistant

Up to 4 switching levels, IP67, NEMA 6, CE, CSA general purpose

Operating temperatures up to 500° F (260° C), CSA Explosion Proof and NSF certifications

Features 2.35” from top of threads to end of stem, user reversible switch & operating temperatures up to 260°C (500°F), CSA and NSF...

Stainless steel, shock resistive construction with a user-reversible switch & operating temperatures up to 260°C (500°F) CSA and NSF...

Heavy duty explosion proof continuous level indication, resistive chain or loop powered 4-20 mA output, anti-stick float design, CSA...

Designed for continous level indication in smaller tanks up to 8 ft, resistive chain or loop powered 4-20 mA output, intrinsically...

Chemical resistant coating, allowing for use in corrosive, acidic, and marine environments, highly accurate and repeatable readings

Flexible stainless steel stem allows for installation in tall tanks without needing a crane, lengths up to 32 feet

Highly accurate explosion proof liquid level transmitter, 4-20 mA, RS-485 (Modbus RTU) output, CSA approved

Level readings of radar sensors to Class I, II, and III hazardous locations, up to 100 feet, ±0.25% accuracy, 6.1 μA output resolution

Accurate level readings of radar sensors to difficult to measure solids, up to 100 feet, ±0.25% accuracy and 6.1 μA output resolution

Provides accurate level readings from all types of liquid level measurement materials, IP68 for worry-free operation, ranges to 50...

Loop powered 4 to 20 mA output level sensor with built-in calculations of current volume, flow, and flow totals, CSA and Class 1,...

1 to 25 ft. (0.3 to 7.6 m) detection range on liquids, integrated keypad/LCD display, CSA and Class 1, Div. 2 certification

Designed for detecting solids and moving objects , ideal for presence/absence detection, object profiling and more

Designed for remote level mesasurement with RS-485 Modbus communication, can also serve as a Modbus network controller for up to 10...

Ultrasonic level sensor uses a larger, more powerful transducer for a 50 ft sensing range, CSA Class 1, Div. 2 certification

Provides a non-contact method of detecting level, presence/absence detection, volume, proximity & distance, CSA approved, Class 1,...

Rugged units, rated intrinsically safe for hazardous locations, fully programmable via RS-485 Modbus

Indoor sensor with a more sensitive transducer to detect difficult targets such as reflective and soft surfaces

Mid range (30 ft) non contact level sensor with data logging, CSA certification

Short range ultrasonic level sensor (up to 79") for small tanks and totes, CSA Class 1, Div. 2 certification

High performance ultrasonic level sensor with Modbus flexibility and Tank Cloud compatibility

Local display designed to be inserted into a 4-20 mA sensor current loop

Local display that works with up to 10 sensors as a master, slave, or power source on any Modbus network

Built for harsh conditions, hazardous locations, high vibration, high pressure spikes and extended temperature compensation

Reliable accuracy in harsh conditions and hazardous locations, with a standard accuracy of 0.25% BFSL, CSA approved

Rugged submersible pressure transmitter designed for tank liquid level measurement

Designed for the rugged environments of land based, ranges to 15,000 psi, CSA/ATEX/IECEx approved

Inexpensive, millivolt transducers, ranges from vacuum to 10,000 psi, single piece stainless steel

Ranges from vacuum to 10,000 psi, all stainless steel construction, high burst pressure, and high acuracy

Rugged, general purpose sensors that offer reliable and accurate, measurements under harsh conditions, 0.5% accuracy

4-pin bayonet mating connector (E3) with 25 ft. cable

4-pin bayonet mating connector (E3) with 10 ft. cable

4-pin bayonet mating connector (E3) with 5 ft. cable

4-pin bayonet mating connector (E3) with 2 ft. cable

Panel mount bracket with screws

Flat Mount Bracket

Flush mount bracket

ACBL, USB to RS-232

ACC, RS485 to USB Adapter with locked serial number

2- Wire cbl adder DST sensors

COAX RG-6/U cbl adder DST sensors

Two configurable, six-character lines, eight LED alarm indicators, and four push buttons, on a display that is smaller than 5" x 2.5"

3 conductor, shielded cable, per ft.