Starting at $806.00USD

MNU-IS Intrinsically Safe Modbus Ultrasonic Level Sensor

Name: MNU-IS Intrinsically Safe Modbus Ultrasonic Level Sensor
SKU: placeholder-mnu-is-intrinsically-safe-modbus-ultrasonic-level-sensor
Price: 806.00 USD
Availability: InStock

Rugged units, rated intrinsically safe for hazardous locations, fully programmable via RS-485 Modbus

Starting at

$806.00USD

Have questions? We're here to help!

Call

Configure

Used in

MNU IS Intrinsically Safe Modbus Ultrasonic Level Sensor 05954

MNU IS ultrasonic sensors are rugged units, rated Intrinsically Safe for hazardous location installations. They feature
APG’s new QuickMode for power-saving, on-demand measurements, and optional GDT surge protection. All MNU
IS sensors are fully programmable via RS-485 Modbus communications, and with APG Modbus software and an RS485-to-USB converter.

New QuickMode
Get an on-demand measurement in as little as 250 ms.

Easy Wiring & Set-up
Everything about MNU IS setup is easy, from simple daisy chain wiring to remote configuration via the Internet.

• Ranges: 1 ft - 25 ft, 5 in - 12 ft
• Self-Contained Sensor
• Multiple Housing Options
• RS-485 Modbus RTU Interface
• Measure Distance, Level, or Volume
• Internal Temperature Compensation
• cCSAus, ATEX, IECEx approved Intrinsically Safe
• 2” NPT and 3/4” NPT mounting options
• QuickMode ready-to-read in as little as 250 ms
• Optional Gas Discharge Tube surge protection

Frequency/ Operating Range	69 kHz: 1 - 25 ft (0.30 - 7.62 m) 81 kHz: 5” - 12 ft (0.13 - 3.66 m)
Beam Pattern	9º off axis
Accuracy	±0.25% of detected range
Resolution	0.1 in. (2.5 mm)
Response Time	Programmable
Connectivity
Output	Modbus RTU (RS-485)
Online Access/Control	Via APG's Tank Cloud & RST-5003 or LOE contoller
Environmental	IP68 (3 meters submerged for 48 hours) M12 connector only rated IP67
Operating Temperature	Standard: -30º - 60ºC (-22º - 140ºF) Alternate: -20º - 50ºC (-4º - 122ºF)
Programming
Interface With RS-485 Modbus RTU	APG Modbus Windows-compatible software can be provided to adjust internal parameters.
Electrical
Supply Voltage	8 - 24 VDC
Operating Current Draw	18 - 26 mA @ 24 VDC, Typical 18 mA 32 - 63 mA @ 8 VDC, Typical 37 mA
Waiting Status Current Draw	13 mA @ 24 VDC 17 mA @ 8 VDC
Wiring Connection	4-conductor shielded, twisted-pair cable
Gas Discharge Tube Surge Protection	150 V, 1 kA
Physical
Upper Housing	PC/PBT blend
Transducer Face	PVDF
Certification
CSA/cCSAus Contract #237484	- Class I, Div. 1, Groups C & D, T4 - Class I, Zone 0, AEx ia IIB T4 Ga - Ex ia IIB T4 Ga
ATEX	- II 1G Ex ia IIB T4 Ga
ICECEx	- Ex ia IIB T4 Ga
CE