Michell Instruments

2% O2 bal. N2 gas cylinder as spare

Calibration kit with two gas cylinders (approximately 2% and 8%)

Calibration kit with one gas cylinder (approximately 8%)

Cable 15ft, length with fittings, supplied on connector

Cable 5m, length with fittings, supplied on connector

Filter kit for Coalescer and Membrane Separator - each

Stand alone heated pressure reduction system 115VAC (300 barg/4350 psig inlet, max 507psig/35barg outlet) - ATEX only

Stand alone heated pressure reduction system 240VAC (300 barg/4350 psig inlet, max 507psig/35barg outlet) - ATEX only

Michell standard mounting frame, floor standing with sun canopy and three sides- 316 box section construction with roof and side panels

Packing for Analyzer with Sun Canopy, with roof and 3 Sides (crate for air, sea & road)

Cable (Pressure Sensor) – 10m

Cable (Pressure Sensor) – 5m

SS 3/4" UNF sample block (with 1/8" BSP and 1/4" BSP ports)

Cable (Pressure Sensor) – 3m

Cable (Pressure Sensor) – 0.3m

Pressure Sensor – 0 to 2500 kPa(G) [0 to 25 bar(A)]

Pressure Sensor – 0 to 160 kPa(A) [0 to 1.6 bar(A)]

Packing for Mounting Frame and accessories only (crate for air, sea & road)

Packing for Analyzer w/ Sun Canopy, GRP Roof & 3 Sides (crate for air, sea & road)

Packing for Main Unit w/ Indoor or Outdoor Sampling System (crate for air, sea & road)

Michell standard mounting frame, floor standing w/ sun canopy & 3 sides- 316 box section construction w/ roof & side panels

Transport case (MK2)

Remote PRT for all S8000 models, 2m cable with connector

Sensor/Gas block replacement O-ring kit

Transit clamp (kit)

Thermal Fuse (70°C)

QMA601 Sample block/oven assembly (calibrated w/ ~5ppmv MG, 2 barg input, 1 barg back pressure)

19" rack mounting kit (requires a shelf)

High Temperature Cable (Pressure Sensor) – 5m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 3m (Max 120°C)

Cable (Pressure Sensor) – 20m

Pack of 10 replacement HMWPE guards (for protection against fine particulates <10µm)

"5/8"" UNF Quick Fit Sample Block with DN7.2 Quick Connector for compressed air. Outlet vent to atmosphere"

G 1/2"" Quick Fit Sample Block with DN7.2 Quick Connector for compressed air

Display assembly for Hazardous Area model

M20 Cable Gland (Nickel Plated Brass 20S - Barrier)

Transport case (MK2/3)

S8000 Integrale MK3 rack mounting kit

Dew-point sensor cable 2M

High Temperature Cable (Pressure Sensor) – 20m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 10m (Max 120°C)

Mirror viewing microscope (S8000 Integrale & S8000 RS)

Dew-point sensor cable 10M

Dew-point sensor cable 5M

Spare sensor - 204024

Spare sensor oven-203013

Gasket for XZR500 wheel

Gasket for XZR500 flange - 10 off