Michell Instruments

Ribbon case assembly for XTC601

Thermal Fuse (70°C)

Blanking plug for XTP601

QMA601 Sample block/oven assembly (calibrated w/ ~5ppmv MG, 2 barg input, 1 barg back pressure)

Membrane/coalescing filter spares kit (membrane, coalescing filters plus 2 o-ring seals)

Packing for Analyzer with Sun Canopy, with roof and 3 Sides (crate for air, sea & road)

Floor standing mounting frame with sun canopy and three sides

Display assembly for Hazardous Area model

Oxygen cleaned tube adapter fitting 1/4"

Oxygen cleaned tube adapter fitting - 6mm

1/4" tube adapter fitting

M20 Cable Gland (Nickel Plated Brass 20S - Barrier)

Ribbon cable assembly

6mm tube adapter fitting

M20 conduit entry 3/4" NPT - nickel plated brass

Blanking plug

Easidew PRO XP replacement display module Kit

Pipe mounting bracket

Stand alone heated pressure reduction system 115VAC (300 barg/4350 psig inlet, max 507psig/35barg outlet) - ATEX only

Stand alone heated pressure reduction system 240VAC (300 barg/4350 psig inlet, max 507psig/35barg outlet) - ATEX only

Filter kit for Coalescer and Membrane Separator - each

Michell standard mounting frame, floor standing with sun canopy and three sides- 316 box section construction with roof and side panels

Packing for Mounting Frame and accessories only (crate for air, sea & road)

Packing for Main Unit w/ Indoor or Outdoor Sampling System (crate for air, sea & road)

Michell standard mounting frame, floor standing w/ sun canopy & 3 sides- 316 box section construction w/ roof & side panels

Packing for Analyzer w/ Sun Canopy, GRP Roof & 3 Sides (crate for air, sea & road)

Packing for mounting frame and accessories only (crate for air, sea & road)

Packing for analyser with sun canopy, GRP roof and 3 sides (crate for air, sea & road)

Packing for main unit with indoor or outdoor sampling system (crate for air, sea & road)

SS sintered guard replacement for protection against fine particulates <80µm

Pack of 10 particulate filter cartridges for protection against fine particulates < 0.1µm for 5/8" sampler kits

Pack of 10 replacement HMWPE guards (for protection against fine particulates <10µm)

SS 3/4" UNF sample block (with 1/8" BSP and 1/4" BSP ports)

"5/8"" UNF Quick Fit Sample Block with DN7.2 Quick Connector for compressed air. Outlet vent to atmosphere"

3/4" SS sample block with 1/8" NPT inlet & outlet ports

G 1/2"" Quick Fit Sample Block with DN7.2 Quick Connector for compressed air

G1/2" SS sample block with 1/8" NPT inlet & outlet ports

Sensor/Gas block replacement O-ring kit

S8000 Integrale MK3 rack mounting kit

Dew-point sensor cable 2M

Dew-point sensor cable 10M

Dew-point sensor cable 5M

High Temperature Cable (Pressure Sensor) – 5m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 3m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 20m (Max 120°C)

High Temperature Cable (Pressure Sensor) – 10m (Max 120°C)

19" rack mounting kit (requires a shelf)

Transport case (MK2)