Michell Instruments

Hand carry case for MDM300-STD and accessories

Battery charger for MDM300 series

MDM300 battery pack for MDM300-IS for serial Number versions S/N 165024 onwards

Battery pack for MDM300-IS

Battery pack for MDM300-STD

2pk 1/8" NPT to 6mm swagelok gas ftg

2pk 1/8" NPT to 1/4" swagelok gas ftg

2pk 1/8" NPT to 1/8" swagelok gas ftg

2pk 1/8" NPT to legris quick connect

Pressure Tx 40barg 5m cable for MDM300-STD (Range 0-580 psig/0-40 barg)

Pressure Tx 10barg 5m cable for MDM300-STD (Range 0-145 psig/0-10 barg)

Pressure Tx 400barg 2m cable for MDM300-STD (Range 0-5800 psig/0-400 barg)

Pressure Tx 100barg 2m cable for MDM300-STD (Range 0-1450 psig/0-100 barg)

Pressure Tx 40barg 2m cable for MDM300-STD (Range 0-580 psig/0-40 barg)

Pressure Tx 10barg 2m cable for MDM300-STD (Range 0-145 psig/0-10 barg)

Pressure Tx 400barg 5m cable for MDM300-STD (Range 0-5800 psig/0-400 barg)

Pressure Tx 100barg 5m cable for MDM300-STD (Range 0-1450 psig/0-100 barg)

5m (16.4') cable for external dew-point sensor

2m (6.56') cable for external dew-point sensor

Connector for remote pressure or temperature sensors

Filter element, 75 µm woven mesh

Filter element, 5 µm woven mesh

Spare I.S. temperature transmitter, -20 to +70°C (-4 to +158°F)

Spare monitor, 85 to 265 VAC and 10 to 72 VDC versions

Spare Easidew PRO I.S. transmitter

Wall mounting bracket for Easidew PRO I.S.

1/2” VCR Washer for sensor to sensor block connection

¼” VCR washer with gasket retainer

8GB SD card

Additional/replacement transmitter labels (price per 2 off labels)

Replacement coalescing filter cartridge, long-pack of 10

¼” VCR female to 6mm Swagelok tube

¼” VCR female to ¼” Swagelok tube

Standard mounting frame, 316SS box section construction, floor standing with sun canopy, with roof and three sides all 316 SS

Packing for analyzer with sun canopy, with roof and 3 sides-crate for air, sea & road

Packing for heat trace line up to 15m length-crate for air, sea & road

Packing for mounting frame and accessories only-crate for air, sea & road

Packing for main unit with outdoor sampling system-crate for air, sea & road

Packing for main unit with indoor sampling system-crate for air, sea & road

Wall mounting bracket for Easidew PRO I.S.

Sensor connector for dew point transmitter

4-digit loop-powered local monitor for the Easidew PRO I.S. and Easidew I.S. transmitters

NFPA99 Enclosure for EA2 or CT2 monitor, Alarm

NFPA99 Enclosure for EA2 or CT2 monitor, No Alarm

Easidew & Pura Universal Comms Kit

4mm Free Flowing Orifice Boss with 1/8” BSPT Entry (x1)

0.4mm Restricting Orifice Boss with 1/8” BSPT Entry (x1) (LOW pressure only)