OMEGA

Ready-Made Insulated Thermocouples with Kapton®, PFA, Glass Braid Insulation and Molded Connectors

10 Pulses per Revolution

Reflector, 32 mm (1.25") diameter with adhesive back, 2 to 3 K reflectivity

RTD Sensors Fluid Immersion High-Accuracy

3-Prong Standard Size Round Pin Connector for Thermocouple, RTD and 3-Wire Thermistor

Resistance Heating Wire, Nickel-Chromium Alloy, 80% Nickel/20% Chromium

Coiled 2100°F Max Nickel Chromium Resistance Heating Wire

Wireless transceiver package includes RF transceiver, USB cable, Windows software and operator's manual

Heat Trace Essentials: Tape, Clamps, and Caution Labels

Analog low pass Butterworth filter daughter board for iNET-423 card, 10 kHz cut off frequency (package of 2)

Analog low pass Butterworth filter daughter board for iNET-423 card, 380 Hz cut off frequency (package of 2)

Cable, Hd44m to Hd44f, 26 Awg, 3 m (10')

Card cage for iNET-410/420/423/430/460 cards, 4 slots, expandable

Auxillary switches for AU-KU disconnects, 1N.O./1N.C.

Auxillary switches for AU-VKA disconnects, 2N.O./2N.C.

Wand probe, cable 152 mm (6") with DB9 connector (barometric pressure/temperature/humidity)

Industrial probe 137 mm (5"), cable 3m (10') w/ stripped wire leads

Cable assembly, 4 conductor, PVC insulation, wiring code 0

Cable assembly, 4 conductor, FEP insulation, wiring code 6

Cable assembly, 4 conductor, PVC insulation, wiring code 3

USB Configurator for TX206 Transmitters

Mounting Bracket

2-phase Biploar Step Motors

2-phase Biploar Step Motors

M12 Cables with Field Mountable Connectors for Resistance Sensors (RTDs)

M12 Cables with Field Mountable Connectors for Resistance Sensors (RTDs)

Power Cords And Adapters for STD 100-240VAC Adaptr Univplug

Paperless Recorders for 250 Ω shunt resistor

Compact flash card reader, USB 2.0 compatible

Environmentally protected connector with 6 female contacts, -55 to 125°C (-67 to 257°F) temperature range

6 conductor, FEP insulation, Wiring Code 5, connectors on both ends, 15 ft standard length

6 conductor, PVC insulation, Wiring Code 4A, connectors on both ends, 15 ft standard length

6 conductor, FEP insulation, Wiring Code 3, connectors on both ends, 15 ft standard length

6 conductor, PVC insulation, Wiring Code 8, connectors on both ends, 15 ft standard length

6 conductor, FEP insulation, Wiring Code 0, connector on IN-USBH end and flying leads on transducer end, 15 ft standard length

2-phase Biploar Step Motors

DIN Connectors for Electrical Connections

2 m (6') vented cable with M12 connector for PX359 for gage ranges <500 psi

5 m (16') vented cable with M12 connector for PX359 for gage ranges <500 psi

0 to 500 psi, Gauge, 4 to 20 mA, Cable

External plug-in display (display is required to program transmitter). Display comes with cable

Module stop (screwed onto DIN rail to support and hold mounted devices)

Power connector unit, 24 Vdc/2.5 A output to power rail

Paddle Wheel Flow Sensor (Requires Fitting and pull up resistor))

Paper, 0 - 500 Range, 7 Day

Paper, 0 - 200 Range, 7 Day

1/4" NPT, 10,000 psi Max. Pressure, for Water and Light Oil

1/4" NPT, 10,000 psi Max. Pressure, for Air, Steam and gases