Skip to main content
Press Enter
OMEGA

AT-1 Heat Trace Essentials Tape, Clamps, & Caution Labels

Heat Trace Essentials: Tape, Clamps, and Caution Labels

Normally ships in
2-3 weeks
Have questions? We're here to help!
Have questions? We're here to help!

Supported Applications

The Omega HT-KIT series comprises U Series Heat Trace Power Connection, End Seal, and Splice Kits designed for connecting SRL, SRP, SRM/E, and CWM heating cables to customer-supplied wiring. These kits support applications including freeze protection, piping process temperature maintenance, and fluid flow and viscosity maintenance.

The series is engineered for use with self-regulating, constant wattage, mineral insulated, and series long line heating cables in both ordinary areas and hazardous (classified) locations where appropriate approvals are met.

Operating Conditions & Performance

Kits feature a liquid-tight design to prevent moisture from reaching electrical connections. The housing is molded of durable polyphenylene sulfide plastic material with stainless steel hardware, rated NEMA 4X for environmental protection.

• Ambient Temperature: -40°F to 160°F (-40°C to 71°C) for UAS and UBC thermostats; -40°F to 400°F (-40°C to 200°C) for the UBC Line-Sensing Thermostat.
• Maximum Pipe Temperature: 482°F (250°C).

Certified minimum cable exposure temperatures are -60°C (-76°F) for SRL and SRM/E cables, with a certified installation temperature of -40°C (-40°F). The series supports hazardous area approvals including ATEX, IECEx, FM, and CSA. Specific certifications include Class I, Div. 2 Groups A*, B, C, D; Class II, Div. 2 Groups E*, F, G; and Class III, Div. 2.

Approvals Summary

• Hazardous Areas: Factory Mutual (FM) Approved and CSA certified for ordinary areas; ATEX, IECEx, FM, and CSA approved for hazardous locations.
• ATEX Rating: CE 0359 IIG Ex e IIC T* Gb Ta -60°C to 195°C (UPC, UMC, UES, RTES Only).
• IECEx Rating: ITS 07.0018X Ex e IIC T* Gb Ta -60°C to 195°C (UPC, UMC, UES, RTES Only).

Configuration Options

The HT-KIT series offers a range of configurations for power connections, end seals, and monitoring. Kits provide water-resistant cable entry with terminal blocks and grommets suitable for self-regulating and constant wattage cables.

Kits and Enclosures

• UPC: Power Connection Box (9.78"H x 4.78"W x 3.6"D).
• UMC: Multiple Entry Connection Box (9.78"H x 8.69"W x 3.6"D).
• UES: Above Insulation End Seal Kit (5.5"H x 2.75"W x 2.25"D).
• RTES: Under Insulation End Seal Kit (1.25"H x 1.75"W x 2"D).
• UESL / UESL-G: RED and GREEN End Seal Signal Light Kits (7"H x 3.25"W x 3.25"D).

Sensors and Thermostats

• UAS: Ambient-Sensing Thermostat with a stainless steel sheath probe (9/16" diameter, 3" insertion length).
• UBC: Line-Sensing Thermostat.
• USL: Signal Light Kit included in UPC configurations.

Mechanical Accessories and Mounting

The series includes mechanical components for securing cables to piping systems. Compression fittings, locknuts, and conduit hubs (CCH-2 or equal) are provided for 3/4" conduit connections.

• Small Pipe Adapter: SPA available for pipes under 1-1/2" diameter.
• Pipe Straps: PS Series stainless steel pipe straps (PS-1, PS-3, PS-10).
• Cable Attachments: AT-1 Aluminum Tape and FT-3 Fiberglass Tape for securing cables to pipes or supports.

Key Product Differences

Variants within the HT-KIT series are distinguished by their function in the heat tracing circuit, enclosure size, and sensing capabilities. The UPC serves as a power connection box, while the UMC provides multiple entry points for monitor wire cables.

• End Seal Configurations: Kits differ based on installation location relative to insulation; UES is designed for above-insulation applications, whereas RTES is configured for under-insulation end sealing.
• Sensing Options: The series offers ambient sensing (UAS) versus line-sensing (UBC) thermostats. The UBC Line-Sensing Thermostat supports a higher operating temperature range (-40°F to 400°F / -40°C to 200°C) compared to the UAS Ambient-Sensing Thermostat.
• Signal Indication: Signal light kits (UESL RED, UESL-G GREEN) provide visual status indication for end seals.

The SSK Single Entry Sealing Kit requires a customer-supplied junction box that is NEMA 4X rated and certified by an appropriate third-party agency to maintain hazardous location ratings. All kits utilize stainless steel hardware and polyphenylene sulfide plastic housings, with specific dimensions varying by model function.

  • UMC & UPC are power connection boxes to connect external power to heat trace cable
  • UES & UESL are end seals for heat trace cable but only the UESL has an indication light
  • NEMA 4X enclosure for complete safety
  • Non-flammable

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more