Fuji Electric

Measures liquid levels for pressures up to 426 psi, universal HART communications protocol

Portable ultrasonic flow meter for noninvasive transit time flow measurement

Air or nitrogen measurements, 25 to 200mm diameter sizes available, various output functions

Transit time, clamp-on flow meter for noninvasive liquid flow measurement

Transit time difference method w/ the advanced ABM (anti-bubble measurement) system

Direct mount measurement for pressures up to 1,450 psi, & with universal HART communications protocol

Measures differential pressure up to 2,900 psi, for use w/ diaphragm seal, communicates using HART communications protocol.

Direct mount transmitter for absolute pressure measurements up to 435 psia, universal HART communications protocol

Measures absolute pressure up to 435 psia, for use w/ diaphragm seal, communicates using HART communications protocol

Measures absolute pressure up to 1,450 psi, for use w/ diaphragm seal, communicates using HART communications protocol

Measures liquid, gas or steam for pressures up to 1450 psia, universal HART communications protocol

Measures liquid, gas or steam for gauge pressures up to 7,252 psi, universal HART communications protocol

Measures gauge pressure up to 7,252 psi

Measure differential pressures of 130 mbar at static pressures of up to 15,000 Psi (1035 bar)

Measures gauge pressure up to 1,450 psi, for use w/ diaphragm seal, & communicates using the HART communications protocol.

Measures liquid, gas, or steam for pressures up to 6,000 psi, universal HART communications protocol

Program loader for PX series

Ethernet communications interface card.

Ethernet communications interface card.

Connect to CC-link master to use run command, speed command, and to access inverter's function codes

Adds building automation and control network link to FRENIC-Eco inverters for HVAC applications

Connects to PROFIBUS DP master node to read and write all FRENIC-Eco function codes

Enables other LONWORKS devices in the network to issue commands and monitor the inverter status.

Transfer data from your flow meter to your PC, and vice-versa

Raincover

FRENIC-Multi NEMA Kit

Enclosure that protects inverter to NEMA1 (UL Type 1 listed) standards

Pair of 16 foot signal cables with male BNC connectors on both ends

Cable to be used with CC-M Loader Software

Fuji Electric Pipe Tape Measure

Mounting adapter for PXR3 DIN rail installation

11 Pin Back Wired Socket

AD.PLT.1/4-16 - 1/4 TO 1/16 DIN ADAPTER PLATE

Mounting adapter that reduces heat radiated or spread inside the panel enclosure

Adjustable frequency AC drive with customizable logic for up to 200 steps.

Direct insertion zirconium oxide oxygen detector for hazardous locations

Manifolds can be direct-mounted or supplied separately for Fuji differential, gauge & absolute pressure transmitters.

Allows users to remotely operate FRENIC-Mini series of inverters

Increases the regenerative braking capability of the FRENIC-Mini series inverters.

Print flow rate readings & other data from the Fuji Electric Portaflow-C ultrasonic flow meter

FSC I/O cable for Portaflow-C version 1 & 2, & FSC3 I/O cable for Portaflow-C version 3 and 4

Pair of 16 foot cables with Lemo connectors on one end & BNC male connectors on the other

19 inch rail for 2 to 16 inch pipes, -40 to 390°F, 2MHz, includes mounting straps & silicone grease

8 to 235 inch pipes, -40 to 175°F, 0.5MHz, includes 16ft signal cable, mounting straps & silicone grease

21.26 inch rail for 2 to 48 inch pipes, -40 to 248°F, 1MHz, includes mounting straps & silicone grease

21.26 inch rail for 0.5 to 12 inch pipes, -40 to 212°F, 2MHz, includes mounting straps & silicone grease

12.6 inch rail for 0.5 to 4 inch pipes, -40 to 212°F, 2MHz, includes mounting straps & silicone grease

35mm DIN rail mounting adapter for the Fuji Electric FRENIC-Mini inverter