Dwyer

K type, 50' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM

Wall Mounting Kit

Meter mounting kit

Clear flexible vinyl tubing

Clear flexible vinyl tubing

Rubber tubing has less tendency to kink in storage and occupies less space, thus is best for portable work

Rubber tubing has less tendency to kink in storage and occupies less space, thus is best for portable work

Aluminum tubing is recommended for permanent installations

Aluminum tubing is recommended for permanent installations.

An economical hand lever ball valve ideal for commercial or general industrial use

Metric air velocity calculator slide chart.

Shutoff type gage connector for 3/16 in rubber tubing

Temperature transmitter enclosure used to mount Series 651 and 659 transmitters to any 1/4 in diameter temperature sensors

Allows users of the TS2, TSS2, TSX, TSF, and TSWB Series to quickly program multiple controllers without external power

Lift loop / hanger for submersible level transmitters

Cable hanger

1/4" nylon tube union

L-type mounting bracket

Rubber tubing to 1/4 in ID plastic tube for 1221, 1222, and 1227 manometers

Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing

1 oz dispenser bottle fluorescein green color concentrate

Spare calibration kit for the Dwyer SAH SMART hoods

SMART hood adapter base kit for the Dwyer SAH SMART hoods

Power supply suitable for powering all Dwyer pressure, temperature, or air velocity transmitters

Vane hood kit to convert a thermo-anemometer into an air volume flow balancing tool for use with small grills and diffusers for the...

Carrying case for pitot tubes up to 48 in

Large, open tip design resists fouling and with permanent mounting models available

Terminal tube, brass, 1/4" diameter tube, 8" length

Digital temperature switch probes to be used with Series TS, TS2, TSX, TSS2, and TSWB instruments

1/8" NPT close coupled street ell, brass

Duct pressure monitor kit

16 ft. shielded cable with 4-pin M-12 connection

Flat aluminum bracket for flush mounting Photohelic and Capsuhelic gauges

Tough gray nylon pouch to protect and series 477AV manometer

Plastic carrying case for Magnehelic® gage of standard range

Plastic 3-way vent valve with 80 PSI rating

Brass safety relief valve protects gages against over pressure

Surface mounting bracket for use with medium pressure or high pressure Magnehelic models only

Power supply, 100 - 240 VAC

Mini-USB to full USB cable

Regulated 120 VAC - 12 or 24 VDC power supply

Dessicant vent filter for submersible level transmitters

Mounting flange in carbon steel or 316 SS with full or half coupling

3-Way manifold & bracket for pressure transmitters.

Field upgradeable LCD display.

Replacement protective terminal cover

HART® Communicator Software

Mini-node RS-485 to USB converter