Dwyer

316 SS clean room pressure sensor

Steel carrying case for portable draft gages 104-8, 104-10 and 48" and larger Slack Tube® manometers - 18-1/2" x 4-3/8" x 2-1/4".

Plastic carrying case for portable inclined gages 109, 100.5, 104-6, 102, 102.5 - 13-1/2" x 10" x 2-3/8".

Plastic carrying case for portable inclined gages 100, 101, 108, 115 - 12-1/4" x 6-1/4" x 1-3/4".

Tough gray nylon pouch to protect and series 477AV manometer

Plastic carrying case (7-9/16" x 5-7/8" x 2-13/16").

Duct pressure monitor kit

Probe extension adapter for Series 640 air velocity transmitter, brass, 1/2" female NPT x 5/16" compression.

Fast, convenient installation of pitot tubes in sheet metal ducts

Line filter for Magnehelic® gage, 1/8" female NPT x 1/8" male NPT.

Line filter for Capsuhelic® gage, 1/4" female NPT x 1/4" male NPT

Extra vanes, pkg. of 2

Mounting bracket, 16 ga steel, zinc plated and Dichromate dipped for corrosion resistance

1/2" plastic hole plugs, 20/bag

Compression fitting connections, 1/8" tube to 1/8" NPT male

Surface mounting bracket for use with medium pressure or high pressure Magnehelic models only

Flush mount bracket for Capsuhelic gauge

Stand-hang bracket, aluminum, for Magnehelic® gage

Surface mounting plate, aluminum, for Magnehelic gage

Manometer cleaning brush, 1/4" OD x 2-1/8" long, attach to wire for use.

Dual porting valve, acrylic plastic, 1/8" NPT fittings, for monitoring three pressures, two at a time, with one gage.

Magnet assembly for 1222 manometers, 2 required (3 required for 1222-36 and M-1000).

Scale clamp bar for 1221 manometer

Stand-hang bracket, aluminum, for Minihelic® II gage.

Aluminum DIN rail - only available in 1 m length (2.8 ft).

Thermometer and terminal tube holder, stainless steel wire.

Gage plug with retainer loop, polyethylene plastic, for 1/4" ID tubing, slip loop over tubing OD and insert plug for seal.

Porting valve, acrylic plastic, 1/8" NPT inserts, used for convenient indication of pressure at two points with a single gage.

Magnetic mounting, edge style, secures edge of acrylic manometer with No. 10-32 machine screw and boots insert.

Magnetic mounting, flat style, secures to flowmeter, etc. with no. 6-32 machine screw and boots insert.

Magneclip, slip on magnetic holder for acrylic plastic gage, per pair.

Pinch clamp to seal rubber tubing, as in a leakage test

Reducer, brass, 1/4" female NPT to 1/8" male NPT.

Carbon steel adapter, 1/8" x 1-1/2" NPT.

Stainless steel adapter, 1/8" x 1-1/4" NPT.

1/8 x 1-1/4" NPT carbon steel adapter.

"T" compression fitting, brass, 1/4" metal tubing.

Flange for mounting A-301, A-302, A-307, A-308 or 1/8" dia Pitot tubes w/compression fitting when interior of duct is not accessible

Terminal tube, brass, 1/4" diameter tube, 8" length

"T" assembly, plastic

"T" assembly, plastic, for 3/16" ID rubber or 1/4" plastic tubing.

Direct drive pressure gage brass adapter, 1/4 in male NPT to G 1/2 A parallel thread 1-1/2 in length

Adapter, nylon, 1/8" NPT to 3/16" ID rubber or 1/4" plastic tubing

1/8" male BSPT to 3/16" hose barb

Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing

Servel adapter, brass 3/8" and 5/16" N.F., threads for gas appliances to 1/8" and 3/16" ID rubber or plastic tubing

Coupling, brass, 1/8" NPT.