Transportation

Portable kit for Series 2-5000 Minihelic® II gage.

Steel carrying case for air velocity meter, No. 400-10.

Plastic carrying case for Magnehelic® gage of standard range

Steel carrying case for air velocity meter, No. 400-5.

Static pressure tip

Used to pick up or sense static pressure drop across air filters & cooling coils

Used to pick up or sense static pressure drop across air filters & cooling coils

Used to pick up or sense static pressure drop across air filters & cooling coils

Used to pick up or sense static pressure drop across air filters & cooling coils

Used to pick up or sense static pressure drop across air filters & cooling coils

Steel carrying case for portable draft gages 104-8, 104-10 and 48" and larger Slack Tube® manometers - 18-1/2" x 4-3/8" x 2-1/4".

Plastic carrying case for portable inclined gages 109, 100.5, 104-6, 102, 102.5 - 13-1/2" x 10" x 2-3/8".

Plastic carrying case for portable inclined gages 100, 101, 108, 115 - 12-1/4" x 6-1/4" x 1-3/4".

Tough gray nylon pouch to protect and series 477AV manometer

Plastic carrying case (7-9/16" x 5-7/8" x 2-13/16").

Duct pressure monitor kit

Fast, convenient installation of pitot tubes in sheet metal ducts

Extra vanes, pkg. of 2

Mounting bracket, 16 ga steel, zinc plated and Dichromate dipped for corrosion resistance

Compression fitting connections, 1/8" tube to 1/8" NPT male

Surface mounting bracket for use with medium pressure or high pressure Magnehelic models only

Flush mount bracket for Capsuhelic gauge

Stand-hang bracket, aluminum, for Magnehelic® gage

Surface mounting plate, aluminum, for Magnehelic gage

Magnet assembly for 1222 manometers, 2 required (3 required for 1222-36 and M-1000).

Scale clamp bar for 1221 manometer

Stand-hang bracket, aluminum, for Minihelic® II gage.

Aluminum DIN rail - only available in 1 m length (2.8 ft).

Thermometer and terminal tube holder, stainless steel wire.

Gage plug with retainer loop, polyethylene plastic, for 1/4" ID tubing, slip loop over tubing OD and insert plug for seal.

Magnetic mounting, edge style, secures edge of acrylic manometer with No. 10-32 machine screw and boots insert.

Carbon steel adapter, 1/8" x 1-1/2" NPT.

Stainless steel adapter, 1/8" x 1-1/4" NPT.

1/8 x 1-1/4" NPT carbon steel adapter.

Terminal tube, brass, 1/4" diameter tube, 8" length

"T" assembly, plastic

Direct drive pressure gage brass adapter, 1/4 in male NPT to G 1/2 A parallel thread 1-1/2 in length

Adapter, brass, 1/8" NPT to 3/16" rubber and 1/8" ID plastic tubing

1-1/4 in to 3/4 in reducer, featuring an electrical rating of 3 A at 250 V AC

Brass adapter, 1/8" female NPT to 1/4" male NPT.

1/8" BSPT 316 SS filter vent plug (replacement filter for the A-464-SS)

1/8" pipe plug, socket hex, plated steel.

1/8" NPT close coupled street ell, brass

1/4" nylon tube union

5/16" nylon tube union

Compression fitting for 1/8 in NPT to 1/4 in metal tubing to connect a filter or muffler to the Dwyer Magnehelic and Capsuhelic gages

Gage connector for 1/4" tubing, slip fits in 3/4" opening in 250 Series AF gages (compression nut and ferrule not included).

Brass safety relief valve protects gages against over pressure