Cannabis

Temperature button data logger

2-valve block manifold

1/2" NPT SS Weldolet for 2-10" pipe sizes

Vane hood kit to convert a thermo-anemometer into an air volume flow balancing tool for use with small grills and diffusers for the...

3/4" BSPT SS Tee

3/4" NPT SS Tee

1" BSPT SS Tee

1-1/4" BSPT SS Tee

1-1/4" NPT SS Tee

1-1/2" NPT SS Tee

1/2" BSPT SS Tee

1/2" NPT SS Tee

1" NPT SS Tee

15 ft (5 m) M12 cable

K type, 50' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 50' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 25' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 25' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 100' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM

K type, 100' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM

J type, 50' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 25' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 25' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 25' on spool, fiber glass insulation, 450°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 100' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM

J type, 100' on spool, fiber glass insulation, 450°C, black outer sheath, 24 AWG, 0.20 SQMM

Replacement protective terminal cover

Replacement pilot valve assembly for SVT Series.

Mounting feet, includes 4 feet (included with SSE-J models only)

hermocouple Input Board (not CE approved).

Cable with alligator clips, 6 ft length.

Replacement smart air hood travel case

Low flow plug

Hard travel case

Pole mounting clips (2)

Spare calibration kit for the Dwyer SAH SMART hoods

SMART hood adapter base kit for the Dwyer SAH SMART hoods

Canvas hood attachment, 4' X 4', (1.2 m x 1.2 m)

Canvas hood attachment, 3' x 3' (0.9 m x 0.9 m), requires A-SAH-BK

Canvas hood attachment, 2' x 4' (0.6 m x 1.2 m), quick setup connection

Canvas hood attachment, 1' x 5' (0.3 m x 1.5 m), requires A-SAH-BK

Canvas hood attachment, 1' x 4' (0.3 m x 1.2 m), quick setup connection

Extendable pole required for operation of all Dwyer SAH models

Extendable pole, 2' to 4' (replacement pole)

Surface mount box for the Series RSME

Retrofit tool for fitting O-ring on RHP-D/M models for new filter A-RHP-FC

Replacement plastic hydrophobic filter.

1/2" NPT to M20 conduit adapter