Rotronic
DIN-Rail Mounting Kit
DIN-rail mounting kit for Rotronic transmitters
AC130 Mounting Gland
Mounting gland for 15 mm HygroClip EX probes
AC5005 Mounting Flange
Mounting flange for duct mount transmitters (15 mm probes), max. 100°C
AC3006 Service Cable
Mini-USB to USB A converter
AC3001
Active cable, 2.8m. HC2 to USB connector
AC3003 Active Signal Booster set for HC2 Probes
Active signal booster set, for HC2 probes, up to 100m (no cable included).
ET-409 Binder 4-Pin Male Connector
Male connector for the Rotronic HygroLog NT Series docking station
AC1214 AC Adapter
AC adapter, 5 VDC for the Rotronic CP11
HC2-CRP Clean Room Probe
Clean Room probe
AC1000 Series Naturally Ventilated Shields
Easy-to-install, multi-plate system for natural ventilation
MKRS-MP102-402 Adaptor
MP102H/402H adaptor for RS application
800-567-8686
MKRS-HC2 Adaptor
HC2A-S3/S3H adaptor for RS application
800-567-8686
RS12T/RS24T Ventilated Shields
Weather and radiation protection shield for meteorology probes
800-567-8686
AW-KHS Clamp Sealing Mechanism
Ensures a strong mechanical seal and is compatible with the WP-40 and WP-40TH sample holders
WP-40/40TH Sample Holder
Sample Holder 40mm
ET-W24-SET Filter
Filter for web and water activity probes HC2-AW-USB and HC2-AW
WP-14-S Sample Holder
Sample holder 14 mm
EGS Calibration devices for sword Probes
Calibration devices for all sword probes
EMV-25 Screw-on Calibration device
Screw-on calibration devices, Ø 25 mm (PG11)
ERV-15 Push-on Calibration Devices
Push-on calibration devices, Ø 15..15 mm
ER-12K Push-on Calibration devices
Push-on calibration devices, Ø 12 mm &
ER-05 Push-on Calibration Devices
Push-on calibration devices, Ø 4…5 mm
EDM-15/15 Push-on Calibration device
Push-on calibration devices for 2 probes, Ø 14…15 mm
ER-15 Push-on Calibration Device
Push-on calibration device Ø 14…15 mm
Humidity Standards
Supplied in packs of 5 hermetically sealed ampoules of the same humidity level
HG2-B HygroGen2 Door Plugs
Standard plug diameter 15 mm or 30 mm
HG2-D HydroGen2 Doors
Equipped with 5 x 15 mm or 6 x 30 mm inputs including plugs
HG2-T HygroGen Transit Case
Soft bag or hard case
AC2001 Connection Cable
Cable to connect HP23 to transmitters (HF3, HF4, HF7)
AC0003 Cable
Standard USB A to Mini USB cable, 1.8 m
SP-S15/50 Filter
Sintered steel, 50um, used with Rotronic dew point probes
LDP-FCPB1 / LDP-FCSB1 Flow Cell
Flow cell with fix valve, POM or stainless steel body, brass body, liter/min @ 8 bar
LDP-MCP / LDP-MCS Measurement Chambers
Measurement chambers with a defined air flow rate and a quick connector for optimum dew point measurement
SP-T15 Spare filter-insert
Teflon, 10µm, -80…200 °C
SP-S15 Spare filter-insert
Sintered steel, 5µm, -100…200 °C
SP-M15 Filter insert, no carrier
Wire mesh, 20…25µm, -100…200 °C
ET-Z10 Filter for handheld probe
Filter for handheld probe
SP-T05
Filter for 5mm Probe HC2-C05
NSP-PCB-PE-AZ
Filter for HF1, CP11 and CL11
NSP-ME Filters and Carriers
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage
SPA-SS Filters and carriers
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage
SP Filter for Meteo probes analog
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage
SP Filters and filter carriers
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage
Service Cables
Connects HF3 transmitter to PC via the UART interface
RMS Monitoring System
The system monitors parameters such as relative humidity, temperature, dew point, door contacts, particles and many more
MDI Intrinsically Safe Modbus Display
Modbus Control and Display in Hazardous Areas