Georg Fischer GF Signet

Hermetically molded, double chamber, mercury free operated micro switch

High corrosion resistant in most liquids, relay output, 1" and 3/4 " threaded mounting

Economical float switch for control of liquids in small tanks, PP and PVDF version available

On site probe length configuration, 2 to 4 individual switching points integrated in one sensor

Maintenance free vibrating principle, independent of the liquid conductivity, dielectric constant, viscosity, pressure & temperature

Full-bore plastic PVC in line style magnetic flow Meter, Titanium or Hastelloy electrodes, Bluetooth 4.2 capable

Transmitter provides single channel interface, multi-parameter input selection

Two channel transmitter/controller can support two sensors of same or different types in one instrument

Cost effective clamp-on flow meter can either be used as a stand alone meter or as an integral part of a control loop

Portable ultrasonic flow meter, transit time measurement technique, 0.1 m/s to 20 m/s flow velocity range

Non-invasive clamp-on ultrasonic sensor for dry servicing, transit time measurement technique, optional data logger

Battery operated flow totalizer is compatible w/ the Signet 515 & 525 flow sensors, & will provide years of dependable operation

Flow sensor has a process-ready open collector signal w/ a wide dynamic flow range of 0.1 to 6 m/s (0.3 to 20 ft/s)

Flow sensor contains a free-running rotor that is driven by the fluid flow

Sensor offers two flow ranges starting at 0.11 or 1.13 lpm, for clean process liquids, regardless of fluid color or opacity

Flow meter for small applications, provides accurate readings in two flow ranges; 0.3 to 3.8 lpm & 3 to 38 lpm

Metal magmeter installs into standard ISO 7-R 1¼ or ISO 7-R 1½ pipe outlets, & is adjustable to fit pipes from DN50 to DN2550

Insertion-style magnetic flow sensor that features no moving parts, optional display

Stainless steel high performance paddle wheel flow sensor

Flow meter w/ low flow capabilities down to 0.1 m/s (0.3 ft/s), digital (S3L) & 4 to 20 mA outputs (multi-function)

Combines stainless steel construction with insertion paddlewheel technology

A multi-channel, multi-sensor controller allows the use of up to six GF sensors to manage complex water treatment applications

Optical DO measurement w/ no flow requirements, calibration built into the measurement cap - 2% of range, 0 to 20 mg/L

For use with the GF Signet 2850 for calibration or validation of conductivity/resistivity electronics

Available in various configurations for maximum installation flexibility

Conductivity/Resistivity Electrodes are available in four cell constants from 0.01 to 10.0 cm-1, 316 SS electrodes w/ injection...

Pressure sensor has a one-piece injection-molded PVDF body & ceramic diaphragm for superior compatibility in corrosive liquids

Supplement the output capabilities of host instruments with digital S3L output

GF Signet Replacement Wire Cable Assembly

Rear enclosure kits allow the GF Signet 9900 Transmitter to be mounted just about anywhere

PVC Saddle

PVC Tee

Replacement Optical Dissolved Oxygen Sensor Cap (0 to 20 ppm)

CLO2 Electrolyte, 30 ml

Sensor Service Kit

Designed to measure free chlorine in drinking water & wastewater treatment application

1 or 2 SPDT Relays

Stainless steel electrode 0.5m (19.69"), 1.0m (39.37"), 1.5m (59.06")

Plugs for the 9900 transmitter

Connects any 9900 transmitter to a Modbus Communication network to transfer live readings & measurements to PLC & SCADA systems

Stainless Steel, Tee

Iron Saddle

Stainless Steel; Mini-Tap (Metalex version only)

Provides the polarization voltage and signal conditioning required by GF Signet Amperometric Sensors

Replacement electrolytes for servicing GF Signet free chrlorine sensors

Flow Switch / Chlorine Panel

Connects the 9950 to existing Modbus RTU, serial RS485, & automation networks including PLCs & SCADA systems