E+E Elektronik

Monitors compressed air, nitrogen, CO2 or other non-corrosive & non-flammable gases

Passive temperature measurement in air and technical gases

Room wireless transmitter based on the IEEE 802.15.4 protocol w/a transmission frequency of 2.4 GHz

Measures up to 3 physical quantities: relative humidity, temp & CO2

Dedicated for humidity and temperature measurement in explosion hazard areas

Cost optimised transmitter for industrial and high-end HVAC applications up to 120°C (248°F)

Dual wavelength non-dispersive infrared technology (NDIR), auto calibration, ranges up to 10,000 ppm

Humidity and temperature transmitter with interchangeable probes

3 in 1 duct mounted transmitter (CO2, humidity, temperature)

For accurate & long term stable measurement under continuous high humidity (>85 % RH)

Designed for HVAC, cost-effective, highly accurate transmitter for relative humidity and temperature

Designed for HVAC applications, IP65/NEMA 4 compact enclosure, outstanding price/performance ratio

4 in 1 probe for CO2, humidity, temperature and pressure

Detects the danger of condensation on pipes, ducts and other surfaces before condensation actually occurs

High accuracy measurement of relative RH & Temp. in demanding climate control applications

IP65 / NEMA 4 enclosure, multi-range device with full scale

Precise measurement of physical quantities, such as humidity, temp, dew point, CO2 & air velocity

Dedicated for the highly accurate measurement of low differential pressure

High precision, optimized for accurate RH & Temp.measurement over a wide working range

Compact Rh & Temp. probes with excellent price/performance ratio, optimized for OEM applications

Duct/immersion temperature sensor, passive or active output, measuring ranges up to 150°C (302°F)

Strap-on sensors are used for temperature measurement around ducts, pipes, passive or active outputs

Wall mounted for indoor & outdoor use, passive or active outputs, measuring range of -40°C - 70°C (-40°F - 158°F)

Interchangeable Humidity/Temperature Probes for OEM Applications

Temperature sensor with remote probe, passive or active outputs

Accurate digital sensor with serial two-wire interface and a simple E2 protocol

High-end humidity and temperature transmitter up to 180°C (356°F) for demanding process control

High accuracy and long term stability at an outstanding price / performance ratio

Designed to meet the highest demands for long-term stable & accurate relative RH & Temp.

Provides precise and reliable measurement results even in the case of permanent high humidity

Measures accurately and reliably relative RH & Temp. & calculates all other humidity related parameters

Base station for a network of up to 500 wireless transmitters for temperature, humidity and CO2

Precise Rh & Temp. factory adjustment ensures a high accuracy of ±2% RH & ±0.3 °C (±0.54 °F)

Highly accurate measurement of water activity & Temp. & calculates the absolute water content in ppm

Hand-held measuring device has been redesigned both visually & technically and offers a wide range of measuring options

Optimised for reliable humidity and temperature measurement in high-end meteorology applications

10 - 95% RH, operates on the fundamental dual-pressure reactor principle

Modular, compact design, thermal measuring principle and hot film sensor element

Connection Cable, 5 pin M12 socket - flying leads 1.5m (3.3ft)

Connection Cable, 5 pin M12 Socket - Flying leads 5 m (16.4ft)

Connection Cable 5 pin M12 Socket - Flying leads 10m (32.8ft)

USB Converter for EE35x

Sampling cell with quick connector

Sampling cell NPT w/bleed screw

Basic Sampling cell ISO

Basic sampling cell NPT

USB configuration adapter