DGH

Allow a host computer to control thousands of digital I/O points from one serial port

Module transparently repeats RS485 signals at all standard baud rates from 300 to 115.2K baud

Converter module converts RS232 signal levels to the correct electrical signals required by RS485

Generates dc voltage and current output signals and communicates using the Modbus RTU serial protocol

Get started right away without any programming effort, perform visualization, open and closed loop control

Power the DGH H1750, H1770 digital products and the DIN-100 series analog input modules

Powers the DGH H1750, H1770 digital products and the DIN-100 series analog input modules

Connect an Ethernet device to a Ethernet Hub, Switch or other Ethernet hardware

Connects a DGH A1000/A2000 RS-232/RS-485 converter to a host computer that utilizes a 9 pin female serial port connector

Interfaces the DGH H1770 digital I/O card to industry standard PB-16 I/O module mounting racks

D Series DIN Rail mounting kit

Used to connect any DGH RS-232 type module to a 9 pin host computer serial port connector