Dickson

WTG 2.4 GHz Wireless Temperature Data Logger

Receive all data automatically at your PC

This product is no longer available. Contact us at 800-567-8686 for alternative solutions.

Have questions? We're here to help!
Have questions? We're here to help!
Call
Email
Used in

Place these data loggers throughout your facility and receive all data automatically at your PC.  No retrieving data from loggers, no hard wiring loggers back to your PC.  This is the easiest and most cost-effective way to create a scalable monitoring network.

Five models are available, each differing in the type or number of probes.  WTG30 comes with one (1) thermistor probe, while the WTG35 comes with two (2) thermistor probes (with attached glycol bottle).  The WTG40 model comes with one (1) K type thermocouple probe, while the WTG45 comes with two (2) K type thermocouple probes.  The WTG50 model comes with one (1) platinum RTD probe (hard-wired).

Each data logger comes with a USB cable, AC adapter, four (4) AA batteries, and a quick start guide.

• Email and Text alerts available
• Eliminates the need to change charts and pens
• Data automatically downloaded to your computer
• Loggers continue to log in the event of a power outage
• Thermistor probe (WTG30/5), K type thermocouple probe (WTG40/5), or platinum RTD probe (WTG50)

Alarm TypeAudio high/low, low battery, calibration due, lost communication alarm
Ambient Operating RH Conditions0% - 95% RH, Non-condensing (logger only)
Ambient Operating Temperature Conditions-22.0°F - 122.0°F (-30.0°C - 50.0°C)
Antenna TypeInternal
ApprovalsRoHS, FCC part 15 compliance, CE
Battery BackupFour (4) AA batteries
Battery Life (Avg)6 months (at 2 min sample rate in moderate conditions)
Cable DetailsUSB - male series A plug to 5 pin male series B mini plug
Cable Length6 ft
Calibration OptionsN100, N300, N400, N520
ChannelsCH1: Temperature (CH2: Temperature)
Data Capacity32,000
Digital DisplayYes
Dimensions1.7 in x 4.25 in x 4.25 in
Download TypeEthernet
EnclosureBlack ABS plastic clam shell
IP Rating21
Included AccessoriesUSB cable, AC adapter, four (4) AA batteries, quick start guide, probe (type and quantity are model dependent)
Mounting OptionsFree standing or wall mount (with keyhole)
Note on Alarm TypeAll alarm conditions will generate a pop-up notification in the Dickson WiZARD software. Text/email notification available with use of WiZARD Enterprise and SECURE software.
NotesLogger reads temperature and sends data back to the receiver at regular intervals
Output Signal4800 baud serial data
PC RequirementsMinimum of 2 GB RAM; Windows XP (with service pack 3), and Windows 7; available USB ports
Power Cord6 ft
Power Source120 V - 240 V AC, 12 V DC (INTL fittings available)
Power Source Input100V - 240 V AC, 0.5 V, 50/60 Hz
Power Source Output9 V DC, 1 A
Power Status IndicatorRed/Green/Blue (RGB) LED
Radio Frequency2.4 GHz
Remote Sensor Length4, 6, or 10 ft
Remote Sensor TypeWTG30/5: Thermistor probe with attached glycol bottle
WTG40/5: K type thermocouple probe
WTG50: Platinum RTD probe
Response Time30 s to 63% FS
Sample IntervalUser selectable (from 10 s - 1 hr, in 10 s intervals)
Signal StrengthLess than 100 mW
Storage Conditions-22.0°F - 158.0°F (-30.0°C - 70.0°C), 0% - 95% RH, Non-condensing
Unit Weight3 lbs
Units/Pkg1
Wireless Range300 ft

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more

Sign up to receive email updates on new product launches, promotions, news, blogs, Brand's Brands videos and so much more!