SP-010-1 Smart Load Cell interface with I/O

Name: SP-010-1 Smart Load Cell interface with I/O
SKU: placeholder-sp-010-1-smart-load-cell-interface-with-i-o
Availability: InStock

Smart Load Cell interface with I/O

Have questions? We're here to help!

Call

Used in

SP 010 1 Smart Load Cell interface with IO 13320

The Omega Link SP-010 Load Cell Smart Probe provides an easy way to integrate your bridge devices to the Omega Link Ecosystem. The SP-010 accepts 4-wire bridge sensors through its M12 4-pin connector and Omega Link Smart Interfaces through its M12 8-pin connector. The M12-S-M-FM accessory connector can be utilized to easily connect wire leads to your SP-010.

The SP-010 determines the bridge impedance and applies an optimized pulsed bridge excitation current during measurements to minimize self-heating effects. The bridge voltage is then used to determine the applied force using bridge characteristics provided by the user.

A 2-point linearization correction may be applied with the ability to capture the measured values. TARE weight adjustment can be triggered through software or external switch closures.

Intuitive Configuration

Configure your Omega Link Smart Probe using SYNC’s intuitive configuration interface. Additionally, an integrated command line interface allows for quick serial setup of your Smart Probe and Smart Interface using standard terminal emulators.

Edge Control and Built in I/O

The Omega Link SP-010 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-010 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.

Smart Core Enabled

Smart Core is integral to all Omega Link Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.

Smart Interface Modularity

Customize your Omega Link Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Omega Link Cloud.

• Autoscaling 350 ohm - 5000 ohm Bridge Input Circuits

• Auto adjusted activation current

• Hardware and software TARE function

• 2-point Linearization

Accuracy
Linearity Error	±0.03% FSO
Thermal Error	±0.005% FSO/C
Environmental
Operating Temperature	-40 to 85℃ (-40 to 185℉)
Rating	IP67 when mated
Mechanical
Dimensions	22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs
General
Agency Approvals	CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility	Compatible with OEG, SYNC configuration software, Omega Link Cloud, and Modbus Networks
Voltage	2.8 VDC - 3.3 VDC
DIO Digital Inputs	VinHighThreshold= 2.2 VMAX VinLowThreshold= 0.3 VMIN VinMAX= 30 VDC
DIO Digital Outputs	2x Open Drain 100 mA max VMAX= 30 VDC
Measurements
Support Strain Gauges
Bridge Sensitivity	1 to 15 mV/V
Bridge Resistance	250 to 15000 Ohm
Input Power