Fluke

MDA-510 Series Motor Drive Analyzer

Simplify complex motor-drive troubleshooting w/ guided test set-ups & automatic drive measurement

Have questions? We're here to help!
Have questions? We're here to help!
Call
Email
MDA 510 Series Motor Drive Analyzer 05261

The new Fluke MDA 510 Motor-Drive Analyzer save time and eliminate the hassle of setting up complex measurements, while simplifying the troubleshooting process. Simply select a test and the step-by-step guided measurements show you where to make voltage and current connections, while the preset measurement profiles ensure you will capture all the data you need for each critical motor-drive section—from the input to the output, the DC bus, and the motor itself. From basic to advanced measurements, the MDA-510 has you covered, and with a built-in report generator you can quickly and easily generate as-found, and as-left reports with confidence.

 
The MDA-510 is the ideal portable motor-drive analysis test tools, and can help safely locate and troubleshoot typical problems on inverter type motor-drive systems.

• Measures inverter output voltage, DC bus voltage and ripple voltage, harmonics, unbalance
• Three powerful test tools in one: Motor-drive analyzer, waveform analyzer and recording data logger all in one
• Four input channels for voltage and current signals
• Measure key motor-drive parameters including voltage, current, DC Bus voltage level and AC ripple, voltage and current unbalance and voltage modulation
• Use simplified measurement setup with preset measurement profiles to automatically trigger data collection based on the chosen test procedure
• Create reports quickly and easily that are perfect for documenting troubleshooting and collaborative work with others
• Measure additional electrical parameters with full 500 MHz oscilloscope, meter and recording capability for complete range of electrical and electronic measurement on industrial systems
• Includes USB A, and USB mini B connectivity

 
 

DC voltage (V dc)
Maximum voltage with 10:1 or 100:1 probe1000 V
Maximum resolution with 10:1 or 100:1 probe1 mV
Full Scale Reading999 Counts
Accuracy at 4 s to 10 us/div±(3 % + 6 counts)
AC voltage (V ac)
Maximum voltage with 10:1 or 100:1 probe1000 V
Maximum resolution with 10:1 or 100:1 probe1 mV
Full scale reading999 counts
50 Hz±(3 % + 10 counts) - 0.6 %
60 Hz±(3 % + 10 counts) - 0.4 %
60 Hz to 20 kHz±(4 % + 15 counts)
20 kHz to 1 MHz±(6 % + 20 counts)
1 MHz to 25 MHz±(10 % + 20 counts)
True-rms voltage (V ac+dc)
Harmonics and spectrumHarmonics: DC to 51st
Spectrum ranges: 1…9 kHz, 9-150 kHz (20 MHz filter on), up to 500 MHz (voltage modulation)
Shaft voltageEvents / second: Indicative percentage based on rise and fall time (Impulse discharges) measurements
Probe settingsVoltage probe: 1:1, 10:1, 100:1, 1000:1, 20:1, 200:1
Current clamp: 0.1 mV/A, 1 mV/A, 10 mV/A, 20 mV/A, 50 mV/A, 100 mV/A, 200 mV/A, 400 mV/A
Shaft voltage probe: 1:1, 10:1, 100:1
PWM voltage (V pwm)
1 MHz to 25 MHz±(10 % + 20 counts)
20 kHz to 1 MHz±(6 % + 20 counts)
60 Hz to 20 kHz±(4 % + 15 counts)
DC to 60 Hz±(3 % + 10 counts)
Full scale reading1100 counts
Maximum resolution with 10:1 or 100:1 probe1 mV
Maximum voltage with 10:1 or 100:1 probe1000 V
Report data captureNumber of screens: Typical 50 screens can be saved in reports (depends on compression ratio)
Transfer to PC: Using 2 GB USB stick or mini-USB to USB cable and FlukeView™ 2 for ScopeMeter™ test too
Rise and fall timeReadings: Voltage difference (dV), time difference (dt), voltage vs time difference (dV/dt), overshoot
Accuracy: As oscilloscope accuracy
Current unbalance drive inputPurpose: To show the highest percentage difference of one of the phase vs average of the 3 AC current values
Accuracy: Indicative percentage based on Aac+dc values
Voltage unbalance drive output and motor inputPurpose: To show the highest percentage difference of one of the phase vs average of the 3 PWM voltages
Accuracy: Indicative percentage based on V PWM values
Voltage unbalance drive inputPurpose: To show the highest percentage difference of one of the phase vs average of the 3 true-rms voltages
Accuracy: Indicative percentage based on Vac+dc values
Voltage/Herz ratio (V/Hz)Purpose: To show the measured V PWM value (see V PWM) divided by the fundamental frequency on variable ac motor speed drives
Accuracy: % Vrms + % Hz
Frequency (Hz)Range: 1.000 Hz to 500 MHz
Full scale reading: 999 counts
Accuracy: ±(0.5 % + 2 counts)
Current (AMP) with current clampRanges: Same as V ac, Vac+dc or V peak
Scale Factors: 0.1 mV/A, 1 mV/A, 10 mV/A, 20 mV/A, 50mV/A, 100 mV/A, 200 mV/A, 400 mV/A
Accuracy: Same as Vac, Vac+dc or V peak (add current clamp accuracy)
Full scale reading800 counts
Pk-to-pk±0.4 division
Max peak, min peak±0.2 division
Accuracy
Maximum resolution with 10:1 or 100:1 probe10 mV
Maximum voltage with 10:1 or 100:1 probe1000 V
ModesModes
Peak voltage (V peak)
AccuracyAs Vac+dc for sinewave signals
PrincipleReadings show the effective voltage based on the average value of samples over a whole number of periods of the fundamental frequency
PurposeTo measure on pulse width modulated signals, like motor drive inverter outputs

• OEM field service engineers
• Motor repair
• Industrial plants

  • Thumbnail of document MDA 500 Data Sheet 8350
    Download

    MDA 500 Data Sheet 8350

    Download
  • Thumbnail of document MDA 510 Motor Drive Analyzer Manual 11449
    Download

    MDA 510 Motor Drive Analyzer Manual 11449

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more

Sign up to receive email updates on new product launches, promotions, news, blogs, Brand's Brands videos and so much more!