Buy now! $380.00USD
INOR

IPAQ-R460 Line-powered Signal Conditioner

4-wire transmitter (line-powered) that accepts Pt RTD, Ni RTD and Thermocouple sensor signals

Buy now!
$380.00USD
Have questions? We're here to help!
Have questions? We're here to help!
Call
Email
Used in
IPAQ R460 Line powered Signal Conditioner 08128

 IPAQ R460 is a programmable 4-wire (separately powered) transmitter. It converts Pt, Ni, KTY and TC sensor signals as well as potentiometer, resistor and mV signals to isolated standard signals.

 
It is possible to configure IPAQ R460 with DIP switches or with the software INOR-Set. With INOR-Set, IPAQ R460 can be configured via PC and the data records can be stored and documented. An additional power supply is not necessary during PC configuration.
 
The commissioning function, which can be switched on at the front, generates a reference signal at the output with which the subsequent signal path can be tested and adjusted.
 
The Power supply can be supplied via the connection terminals or via the In-Rail-Bus connector. The supply voltage and error status are indicated by LEDs on the front of the unit.
• Easy configuration via DIP switch or via INOR-Set
• Switchable service functions for easy commissioning
• 3-port isolation
• Protection against measurement errors due to earthing problems and interference voltage carry-over
• Extremely slim design 6.2 mm narrow bayed housing for simple and space-saving top-hat rail mounting
• Optional in-rail bus mounting rail connector allows fast and cost-effective installation
• Safe isolation according to EN 61140 Protection of maintenance personnel and downstream equipment from impermissibly high voltage
Weightapprox. 70 g
Design6.2 mm:n (0.244″) bayed case, protection class IP 20, mounting on 35 mm top-hat rail acc. to EN 60715
Ambient temperatureOperation: -25…+70 °C (-13…+158 °F)
Transport and storage: -40…+85 °C (-40…+185 °F)
EMCEN 61326-1
ConfigurationDIP switch or INOR-Set
Typical accuracyMax. ±0.05 K or ±0.05 % of measuring range
Power supply24 V DC
Voltage range 9.6…31.2 VDC, approx. 0.8 W
Sensor connection2-, 3-, 4-wire
Measuring channels1 channel
Galvanic isolation3 kV AC, 50 Hz, 1 min
Output0…20 mA, 4…20 mA, 0…10 mA, 2…10 mA,
0…5 V, 0…10 V, 1…5 V, 2…10 V
Type of TransmitterDigital
Measuring range ThermocoupleType B: +250… +1820 °C
Type C (W5Re_W26Re): 0… +2315 °C

Type D (W3Re_W25Re): 0… +2315 °C

Type E: +270… +1000 °C

Type J: +210… +1200 °C

Type K: +200… +900 °C

Type L: +200… +900 °C

Type N: +270… +1300 °C

Type R: -50… +1768 °C

Type S: -50… +1768 °C

Type T: -270… +400 °C

Type U: +200… +600 °C
Measuring range RTDPt 100, Pt 200, Pt 500, Pt 1000: -200… +850 °C
Ni 100: -60… +250 °C

Ni 200, Ni 500, Ni 1000: -50… 180 °C
Input ThermocoupleTyp B, E, J, K, L, N, R, S, T, U, W5Re_W26Re, W3Re_W25Re;
Input RTDPt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni500, Ni1000
InputRTD, Thermocouple, mV, ohm and KTY
TypeRail-mounted
  • Thumbnail of document Data Sheet IPAQ R460 EN 14565
    Download

    Data Sheet IPAQ R460 EN 14565

    Download
  • Thumbnail of document User Instruction IPAQ R460 EN 14566
    Download

    User Instruction IPAQ R460 EN 14566

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more

Sign up to receive email updates on new product launches, promotions, news, blogs, Brand's Brands videos and so much more!