FLM Magnetostrictive Level Sensor
Used for continuous level measurement of liquids & are based on determining position of a magnetic float according to magnetostrictive measuring principle
The level sensor models FFG-P, FFG-T, FFG-TP and the FLM-H level sensor are used for the high-accuracy, continuous level measurement of liquids and are based on determining the position of a magnetic float according to the magnetostrictive measuring principle.
The magnetostrictive measuring principle of the level sensor enables the continuous measurement of levels, independent of physical and chemical changes of the media such as temperature, conductivity, dielectric, pressure, foaming, vacuum, condensation, vapours, bubble formation, boiling effects and density change Via the HART® interface, the parallel measurement of overall level and interface layer is possible.
By means of the level sensor, the level can be displayed proportional to volume or height.
Installation and commissioning of the level sensor is simple: Only one calibration is carried out, a recalibration is not required. Float, process connection and guide tube can be manufactured from titanium, stainless steel 1.4571, 1.4435, 1.4539 or various plastics.
• Process and system-specific solutions possible
• Operating limits:
- Operating temperature: T = -90 to +400 °C
- Working pressure: P = Vacuum to 100 bar
- Limit S. G.: ρ ≥ 400 kg/m3
• Resolution < 0.1 mm
• Wide variety of different electrical connections, process connections and materials
• Explosion-protected versions
• High-accuracy level measurement for almost all liquid media
• Chemical industry, petrochemical industry, natural gas, offshore, shipbuilding, machine building, power generating equipment, power stations
• Process water and drinking water treatment, food and beverage industry, pharmaceutical industry
