EA2-TX-M12 Dew-Point M12 Transmitter for Compressed Air

Name: EA2-TX-M12 Dew-Point M12 Transmitter for Compressed Air
SKU: placeholder-ea2-tx-m12-dew-point-m12-transmitter-for-compressed-air
Availability: InStock

Moisture meter measuring dew point & moisture content, available w/ a range of process connections & M12 electrical connectors

Have questions? We're here to help!

Call

Used in

EA2 TX M12 Dew Point M12 Transmitter for Compressed Air 05629

The Easidew sensor is a moisture meter that measures both dew point and moisture content. It is simple to install as it is available with a wide range of process connections and electrical connectors. All Easidew dew-point transmitters are available with a service exchange program which reduces the cost and time spent on maintenance.

Reconfiguration of the transmitters is simple with the self-contained Easidew and Pura communications kit.

Michell’s Ceramic Metal-Oxide Moisture Sensor-based Hygrometers are calibrated to international standards and are delivered with a traceable calibration certificate.

• Measurement ranges -110 up to +20°Cdp

• Dew point or ppmV moisture content output

• Accuracy ±2 °Cdp

• Traceable calibration certificate

• Easidew I.S. IECEx, cQPSus, ATEX and UKCA approvals

• Low cost of ownership and easy maintenance with sensor exchange program

• 316 Stainless steel sensor and sample blocks

• 5/8” UNF, 3/4” UNF, G 1/2” process connections

• MiniDIN 43650, M12 electrical connectors

• Oxygen Service cleaned

Associated Oxygen Sensor

Industry 4.0 Data Monitoring System

Process Connection	5/8” -18 UNF, 3/4” - 16 UNF, G1/2” BSP
Weight	150g
Electrical Connections	M12 5 Pin (A coded)
Mating Electrical Connectors	Optional 0.8, 2, 5 metre M12 A coded connector/cable available
Diagnostic Conditions (Factory Programmed)	Conditions Sensor fault Under-range dew point Over-range dew point Output 23 mA 4 mA 20 mA
Performance Specifications
Measurement Range	–110 to +20°C dew point; –100 to +20°C dew point; non standard ranges available on request
Accuracy	±2°C dew point*
Response Time	5 mins to T95 (dry to wet)
Repeatability	0.5°C dew point
Calibration	Traceable 13 point calibration certificate
Electrical Specifications
Output Signal	Easidew M12: Modbus RTU over RS485
Output	Dew point or moisture content
Analog Output Scaled Range	Dew point: –110 up to +20°C; Moisture content in gas: 0– up to 3000 ppmV;
Supply Voltage	12 to 28 V DC
Load Resistance	Max 250 Ω @ 14 V (500 Ω @ 24 V)
Current Consumption	23 mA max, depending on output signal
CE Conformity	Approved
Operating Specifications
Operating Temperature	-40 to +60°C
Compensated Temperature Range	-20 to +50°C
Storage Temperature	-40 to +60°C
Operating Pressure	45 MPa (450 barg) maximum
Flow Rate	1 to 5 Nl/min mounted in standard sampling block; 0 to 10 m/sec direct insertion
Mechanical Specifications
Ingress Protection	IP65
Oxygen Service	Optional: cleaned for enriched oxygen
Housing Material	316 stainless steel
Dimensions	M12 5 pin L = 155mm x ø45mm (with connector cable)
Filter (Sensor Protection)	Standard: HDPE <10μm Optional: 316 stainless steel sintered guard <80μm

• Compressed air Class 1 to Class 6 dryers

• Breathing air quality and safety

• Moisture in Hydrogen cooled electricity generators

• Quality of inert and bulk gases

• Monitoring controlled conditions in glove boxes

• Quality of welding gases

• Moisture and dew-point measurements in hazardous areas

• Oxygen purity applications

Download
Michell Instruments Easidew Transmitters US Datasheet v3 1 13478
Download
Download
Michell Instruments Easidew 2 wire Manual v3 3 13479
Download