EA2/34-SAM Easidew Sampler Sampling System

Name: EA2/34-SAM Easidew Sampler Sampling System
SKU: placeholder-ea2-34-sam-easidew-sampler-sampling-system
Availability: InStock

Low-cost, self-contained sampling system, w/ filtration & flow control, for measurement of either pressure or atmospheric dew points

Have questions? We're here to help!

Call

Used in

EA234 SAM Easidew Sampler Sampling System 05592

A low-cost, self-contained sampling system, with filtration and flow control, for measurement of either pressure or atmospheric dew points.

• Universal configuration for atmospheric or line pressure dew-point measurements
• Integral particulate filter
• Metering valve for flow control
• Single block design for faster measurement response
• Gas pressure to 1 MPa (10 barg) with a high pressure option to 21 MPa (210 barg) available

Gas Flow Rate	1 to 5 Nl/min
Operating Pressure	1 MPa (10 barg) with a high pressure option to 21 MPa (210 barg) available
Particulate Filter	99.5% removal of 0.3 microns
Gas Connections	Quick Connect fittings for 6mm O/D plastic tubing or ¼" Swagelok® tube fittings (PTFE or FEP recommended)
Sample Tube	Supplied with 0.5m pig-tail vent tube, to prevent back-diffusion
Vacuum Rating	Standard push fittings are not vacuum rated
Construction Material	Block and Cap: 316 Stainless Steel Flow Control Block: Aluminium Couplings: Nickel plated Brass
Sensor Port	⅝” UNF to support all Michell Instruments' Impedance Sensors / Transmitters
Environmental	IP66 (NEMA 4)
Operating Temperature	-40 to +60°C (or as determined by sensor specification)
Storage Temperature	-40 to +70°C, 0-95% RH; non-condensing
Weight	1.1kg (1.3kg with sensor installed)