Skip to main content
Press Enter
Amprobe

CT-400 Signal Clamp

Improve accuracy and performance when there is no access to bare conductors, for use with Amprobe's AT-6000 Advanced Wire Tracer Series

This product is no longer available. Contact us at 800-567-8686 for alternative solutions.

Have questions? We're here to help!
Have questions? We're here to help!

The CT-400 Signal Clamp accessory is used to induce a signal into wires without access to bare conductors. For use with Amprobe’s Advanced Wire Tracers.

Measurement categoryCAT IV 600 V, CAT III 1000 V
Operating voltage0 to 1000 V AC
Operating frequencyWire tracing: 32.768 kHz
AC current measurement: 45 Hz to 400 Hz
Response timeInstantaneous
Current output of signal (typical)1 mA/A for AC current measurement with multimeter
Signal voltage output (nominal)De-energized circuit: 2.4 V RMS, 24 Vp-p
Operating temperature32 °F to 122 °F (0 °C to 50 °C)
Operating humidity95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to <122 °F (40 °C to <50 °C)
Storage temperature and humidity-4 °F to 158 °F (-20 °C to 70 °C), <95% RH
Operating altitude0 to 6561 ft (2000 m)
Pollution degree2
IP ratingIP 40
Drop test3.28 ft (1 m)
Maximum conductor size1.26 in (32 mm)
Dimensions (L x W x H)Approx. 5.9 x 2.75 x 1.18 in
(150 x 70 x 30 mm)
WeightApprox. 0.25 lb (0.114 kg)

  • Thumbnail of document AT 6000 Series Datasheet 12140
    Download

    AT 6000 Series Datasheet 12140

    Download
  • Thumbnail of document 6010521 0000 ENG A W 12141
    Download

    6010521 0000 ENG A W 12141

    Download
  • Thumbnail of document AT 6000 Manual Rev C 12142
    Download

    AT 6000 Manual Rev C 12142

    Download

Request a Calibration Quote

We’re here to make calibration easy. Request a quote today and let our team give you the care, precision, and service you can trust.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more