Fluke

417D/62 MAX+ Laser Distance Meter/IR Thermometer Kit

The most rugged IR thermometer teamed w/ the easy-to-use Laser Distance Meter has everything you need

Have questions? We're here to help!
Have questions? We're here to help!
Call
Email
Used in
417 D62 MAX Laser Distance Meter IR Thermometer Kit 07242

The HVAC Troubleshooting Kit

The most rugged Fluke 62 MAX+ IR thermometer teamed with the easy-to-use 417D Laser Distance Meter has everything you need to configure HVAC layouts and troubleshoot electrical problems. For electrical devices use the IR thermometer to test overheating issues and for HVAC layout, use the 417D to configure layout distance or area and use continuous measurement for marking references.
 
Fluke 417D Laser Distance Meter Additional Features:
 
Continuous measurement capable: adjusting as you move closer and farther from your target
Quickly calculate area (sq. feet/meters)
1-meter drop tested and IP54 rated: built to withstand rainy or dusty conditions
Great for interior and exterior applications
Fluke 62 MAX+ IR Thermometer Additional Features:
 
Dust and water-resistant: IP54 rated
Rugged: 3-meter (9.8-foot) drop tested
Ergonomically designed: Completely redesigned for a more natural hand fit
Large, backlit display: Makes data easier to read, even in dark areas

Fluke 417D Laser Meter

• The Fluke 417D laser meter is accurate, durable, and easy to use—just point and shoot
• Instantly measure up to 40 m (131 ft.) with 1-button point-and-click
 
Fluke 62 MAX+ IR Thermometer
 
• Distance to spot: 12:1
• Dual lasers: Identifies area to be measured
Spectral response 8 to 14 microns
Emissivity 0.10 to 1.00
Display resolution 0.1 °C (0.2 °F)
Repeatability (% of reading) ± 0.5 % of reading or ± 0.5 °C (whichever is greater)
Power 1 AA alkaline battery
Battery life 8 hours with laser and backlight on
Weight 255 g (8.99 oz)
Size (175 x 85 x 75) mm
(6.88 x 3.34 x 2.95) inches
Operating temperature 0 °C to 50 °C
(32 °F to 122°F)
Storage temperature -20 °C to 60 °C
(-4 °F to 140 °F)
(without battery)
Operating humidity Non- condensing @ ≤ 10 °C (50 °F)
≤ 90 % RH @ 10 °C (50 °F) to 30 °C (86 °F)
≤ 75 % RH @ 30 °C (86 °F) to 40 °C (104 °F)
≤ 45 % RH @ 40 °C (104 °F) to 50 °C (122 °F)
Operating altitude 2000 meters above mean sea level
Storage altitude 12,000 meters above mean sea level
Drop test 3 meters
Implement standard Q/ASF01
Compliance IEC 61010-1: Pollution Degree 2
Laser safety IEC 60825-1 Class 2, 650 nm, < 1 mW
Ingress protection rating IP 54 per IEC 60529
Warranty 3 years
417D
Typical range [1] 0.2-40 m/0.6-131 ft
Typical measuring tolerance* [1] 2.0 mm ± 1.5 mm/± 0.06 in ***
Maximum measuring tolerance [2] ± 3.0 mm/0.12 in ***
Accuracy up to 10m (+/-) ± 2 mm
Display 2 line/1 mm/1/32 in
Display illumination Yes
Laser point at distance 6/30/60 mm (10/40/100 m)
Area Yes
Units setting (smallest units displayed) 0,000m, 0' 00'' 1/32, 0 in 1/32
Auto laser switch off 90 sec
Auto power switch off 180 sec
Laser class II
Laser type 635 nm, <1 mW
Protection class IP54
Battery life (2 x AAA) 1.5 V NEDA 24A/IEC LR03 Up to 3,000 measurements
Size (Hx W x D) 11.9 x 3.8 x 2.6 cm
Drop test 1 meter
Weight (with batteries) 95g (3.35 oz)
Temperature range: Storage -25 °C to 70 °C (-13 °F to 158 °F)
Temperature range: Operation -10 °C to 50 °C (14 °F to 122 °F)
Calibration cycle Not applicable
Maximum relative humidity 85 % @ 20°F to 120 °F
(-7 °C to 50 °C)
Safety CAN/CSA-C22.2 No. 61010-1-04, UL Std. No. 61010-1 (2nd Edition), ISA-82.02.01, IEC Standard No. 61010-1:2001, EN60825-1:2007 (Class II)
EMC 61326-1:2006
62 MAX+
Temperature range - 30 °C to 650 °C
(-22 °F to 1202 °F)
Accuracy (Calibration geometry with ambient temperature 23 °C +/- 2 °C) ± 1.0 °C or ± 1.0 % of reading, whichever is greater
± 2.0 °C at -10 °C to 0 °C
± 3.0 °C at -30 °C to -10 °C
Optical resolution 12:1
(calculated at 90 % energy)
Response time (95 %) < 300 ms (95 % of reading)
  • Thumbnail of document 6012529 en Fluke 417 D Laser Distance Measurer ds w 12400
    Download

    6012529 en Fluke 417 D Laser Distance Measurer ds w 12400

    Download

Request a Service Quote

Get a customized quote for calibration, validation, repair, or training services designed to keep your instruments accurate and compliant.
Learn more

Browse By Brands

Uncover the brands that set the standard for quality and dependability in every industry we serve.
Learn more

Sign up to receive email updates on new product launches, promotions, news, blogs, Brand's Brands videos and so much more!